Our standards
from A to Z
This list of our standards is constantly being updated and expanded.
Questions about specific standards or procedures can be asked directly to our employees by phone or sent via e-mail.
Contact
| ASTM B 117 Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM B 368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM B 764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) |
| ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 523 Standard Test Method for Specular Gloss |
| ASTM D 968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
| ASTM D 1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 2369 Standard Test Method for Volatile Content of Coatings |
| ASTM D 2370 Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 3330 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM G 69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| ASTM G 85 Standard Practice for Modified Salt Spray (Fog) Testing |
| DIN 6167 Description of yellowness of near-white or near-colourless materials |
| DIN 6175 Colour tolerances for automotive coatings - Solid and effect coatings |
| DIN 25415 Paints and varnishes - Determination of abraison behaviour |
| DIN 30646 Self-adhesive signs - Technical delivery conditions for signs made of plastic film, aluminium foil and paper |
| DIN 50018 Testing in a saturated atmosphere in the presence of sulfur dioxide |
| DIN 51453 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method |
| DIN 53019-1 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry |
| DIN 53100 Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials |
| DIN 53435 Bending test and impact test on dynstat test specimens |
| DIN 53504 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test |
| DIN 55635 Cyclic corrosion testing of coating systems on materials and components in automotive construction |
| DIN 55665 Natural weathering of coatings - weathering location: Magdeburg |
| DIN 55670 Method for testing paint coatings for pores and cracks using high-voltage |
| DIN 75200 Determination of burning behaviour of interior materials in motor vehicles |
| DIN 75201 Determination of the fogging characteristics of trim materials in the interior of automobiles |
| DIN EN 927-3 Coating materials and coating systems for exterior wood - Natural weathering testweathering location: Magdeburg |
| DIN EN 927-5 Coating materials and coating systems for exterior wood - Assessment of the liquid water permeability |
| DIN EN 927-6 Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| DIN EN 1062-3 Coating materials and coating systems for exterior masonry and concrete - Determination of liquid water permeability |
| DIN EN 1062-11 Coating materials and coating systems for exterior masonry and concrete - Methods of conditioning before testing |
| DIN EN 1464 Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 1465 Determination of tensile lap-shear strength of bonded assemblies |
| DIN EN 1542 Measurement of bond strength by pull-off |
| DIN EN 1767 Infrared analysis |
| DIN EN 3665 Filiform corrosion resistance test on aluminium alloys |
| DIN EN 13130-4 Determination of 1,3-butadiene in plastics |
| DIN EN 13300 Paints and varnishes for interior walls and ceilings |
| DIN EN 13523-17 Adhesion of strippable films |
| DIN EN 13523-27 Resistance to humid poultice (Cataplasm test) |
| DIN EN 16516 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| DIN EN 16866 Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| DIN EN 20105-A02 Grey scale for assessing change in colour |
| DIN EN 60068-2-14 Environmental testing - Test N: Change of temperature |
| DIN EN 60068-2-70 Abrasion of markings and letterings caused by rubbing of fingers and hands |
| DIN EN IEC 60079-0 Explosive atmospheres - Surface resistivity |
| DIN EN 60216-1 Thermal endurance properties - Ageing procedure |
| DIN EN 60216-2 Thermal endurance properties - Choice of test criteria |
| DIN EN 60216-5 Thermal endurance properties - Determination of relative temperature index (RTI) |
| DIN EN 60695-11-10 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| DIN EN 61074 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by DSC |
| DIN EN 61340-2-1 Ability of materials and products to dissipate static electric charge |
| DIN EN ISO 105-A03 Grey scale for assessing staining |
| DIN EN ISO 105-B02 Colour fastness to artificial light: Xenon arc fading lamp test |
| DIN EN ISO 105-B06 Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
| DIN EN ISO 105-X12 Colour fastness to rubbing (Crockmeter-Test) |
| DIN EN ISO 178 Determination of flexural properties |
| DIN EN ISO 179-1 Determination of Charpy impact properties |
| DIN EN ISO 527-1 Determination of tensile properties - General principles |
| DIN EN ISO 527-2 Determination of tensile properties - Test conditions for moulding and extrusion plastics |
| DIN EN ISO 527-3 Determination of tensile properties - Test conditions for films and sheets |
| DIN EN ISO 527-4 Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| DIN EN ISO 527-5 Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites |
| DIN EN ISO 604 Plastics - Determination of compressive properties |
| DIN EN ISO 844 Rigid cellular plastics - Determination of compression properties |
| DIN EN ISO 1183-1 Methods for determining the density of non-cellular plastics - Immersion method, |
| DIN EN ISO 1456 Appendix A - Determination of cracks and pores in chromium coatings |
| DIN EN ISO 1456 Appendix B - Test method for determining the layer thickness |
| DIN EN ISO 1456 Appendix E - STEP Test |
| DIN EN ISO 1463 Measurement of coating thickness - Microscopical method |
| DIN EN ISO 1518-1 Determination of scratch resistance - Constant-loading method |
| DIN EN ISO 1519 Bend test - cylindrical mandrel |
| DIN EN ISO 1520 Cupping test |
| DIN EN ISO 1522 Pendulum damping test |
| DIN EN ISO 1798 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break |
| DIN EN ISO 2177 Measurement of coating thickness - Coulometric method by anodic dissolution |
| DIN EN ISO 2178 Measurement of coating thickness - Magnetic method |
| DIN EN ISO 2360 Measurement of coating thickness - Amplitude-sensitive eddy-current method |
| DIN EN ISO 2409 Cross-cut test |
| DIN EN ISO 2808 Method 6A - cross section |
| DIN EN ISO 2808 Method 6B - wedge cut |
| DIN EN ISO 2808 Method 7B.2 - Magnetic field change, magnetic inductive method |
| DIN EN ISO 2808 Method 7C - Eddy current method |
| DIN EN ISO 2810 Natural weathering of coatings - Exposure location: Magdeburg |
| DIN EN ISO 2811-1 Determination of density - Pycnometer method |
| DIN EN ISO 2812-1 Determination of resistance to liquids - Immersion in liquids other than water |
| DIN EN ISO 2812-2 Determination of resistance to liquids - Water immersion method |
| DIN EN ISO 2812-3 Determination of resistance to liquids - Method using an absorbent medium |
| DIN EN ISO 2812-4 Determination of resistance to liquids - Spotting methods |
| DIN EN ISO 2813 Determination of gloss value at 20°, 60° and 85° |
| DIN EN ISO 2815 Buchholz indentation test |
| DIN EN ISO 2884-1 Determination of viscosity using rotary viscometers - Cone-and-plate viscometer operated at a high rate of shear |
| DIN EN ISO 3219-1 Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry |
| DIN EN ISO 3219-2 Rheology - Part 2: General principles of rotational and oscillatory rheometry |
| DIN EN ISO 3251 Determination of non-volatile-matter content |
| DIN EN ISO 3668 Visual comparison of colour of paints |
| DIN EN ISO 4532 Determination of the resistance of enamelled articles to impact - Pistol test |
| DIN EN ISO 4623-1 Determination of resistance to filiform corrosion - Steel substrates |
| DIN EN ISO 4623-2 Determination of resistance to filiform corrosion - Aluminium substrates |
| DIN EN ISO 4624 Pull-off test for adhesion |
| DIN EN ISO 4628-1 Designation of quantity and size of defects, and of intensity of uniform changes in appearance |
| DIN EN ISO 4628-2 Assessment of degree of blistering |
| DIN EN ISO 4628-3 Assessment of degree of rusting |
| DIN EN ISO 4628-4 Assessment of degree of cracking |
| DIN EN ISO 4628-5 Assessment of degree of flaking |
| DIN EN ISO 4628-6 Assessment of degree of chalking by tape method |
| DIN EN ISO 4628-7 Assessment of degree of chalking by velvet method |
| DIN EN ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| DIN EN ISO 4628-10 Assessment of degree of filiform corrosion |
| DIN EN ISO 4892-2 Methods of exposure to laboratory light sources - Xenon-arc lamps |
| DIN EN ISO 4892-3 Methods of exposure to laboratory light sources - Fluorescent UV lamps |
| DIN EN ISO 6270-1 Determination of resistance to humidity - Condensation (single-sided exposure) |
| DIN EN ISO 6270-2 Determination of resistance to humidity - Condensation (in-cabinet exposure with heated water reservoir) |
| DIN EN ISO 6272-1 Rapid-deformation (impact resistance) tests |
| DIN EN ISO 6383-1 Determination of tear resistance - Trouser tear method |
| DIN EN ISO 6504-3 Determination of hiding power of paints for masonry, concrete and interior use |
| DIN EN ISO 6721-1 Determination of dynamic mechanical properties - Part 1: General principles |
| DIN EN ISO 6860 Bend test (conical mandrel) |
| DIN EN ISO 6892-1 Metallic materials - Tensile testing - Method of test at room temperature |
| DIN EN ISO 7783 Determination of water-vapour transmission properties - Cup method |
| DIN EN ISO 7784-1 Determination of resistance to abrasion - Method with abrasive-paper covered wheels and rotating test specimen |
| DIN EN ISO 7784-2 Determination of resistance to abrasion - Method with abrasive rubber wheels and rotating test specimen |
| DIN EN ISO 8130-2 Determination of density by gas comparison pycnometer |
| DIN EN ISO 8130-13 Particle size analysis by laser diffraction |
| DIN EN ISO 8295 Determination of the coefficients of friction |
| DIN EN ISO 8503-2 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
| DIN EN ISO 9073-3 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method |
| DIN EN ISO 9117-3 Surface-drying test using ballotini |
| DIN EN ISO 9117-5 Surface-drying test using Modified Bandow-Wolff test |
| DIN EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests |
| DIN EN ISO 9466 Test methods for the corrosion protection of coatings for rail vehicles |
| DIN EN ISO 11357-2 DSC - Determination of glass transition temperature and step height |
| DIN EN ISO 11357-3 DSC - Determination of temperature and enthalpy of melting and crystallization |
| DIN EN ISO 11357-4 DSC - Determination of specific heat capacity |
| DIN EN ISO 11357-5 DSC - Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| DIN EN ISO 11357-8 DSC - Determination of thermal conductivity |
| DIN EN ISO/CIE 11664-4 CIE 1976 L*a*b* colour space |
| DIN EN ISO 11890-1 Determination of volatile organic compound (VOC) content - Difference method |
| DIN EN ISO 11890-2 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Gas-chromatographic method |
| DIN EN ISO 11997-1 Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humid |
| DIN EN ISO 11997-2 Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light |
| DIN EN ISO 11997-3 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction |
| DIN EN ISO 11998 Determination of wet-scrub resistance and cleanability of coatings |
| DIN EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods |
| DIN EN ISO 12944-9 Corrosion protection of steel structures by protective paint systems - Protective paint systems and laboratory performance test methods for offshore and related structures |
| DIN EN ISO 13934-1 Determination of maximum force and elongation at maximum force using the strip method |
| DIN EN ISO 13937-2 Determination of tear force of trouser-shaped test specimens |
| DIN EN ISO 14125 Determination of flexural properties |
| DIN EN ISO 14577-1 Instrumented indentation test for hardness and materials parameters - Test method |
| DIN EN ISO 14577-4 Instrumented indentation test for hardness and materials parameters - Test method for metallic and non-metallic coatings |
| DIN EN ISO 15711 Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| DIN EN ISO 16000‑9 Determination of emission of volatile organic compounds from building products and furnishing - Emission test chamber method |
| DIN EN ISO 16276-1 Pull-off testing |
| DIN EN ISO 16276-2 Cross-cut testing and X-cut testing |
| DIN EN ISO 16474-2 Methods of exposure to laboratory light sources - Xenon-arc lamps |
| DIN EN ISO 16474-3 Methods of exposure to laboratory light sources - Fluorescent UV lamps |
| DIN EN ISO 16773-2 EIS on coated and uncoated metallic specimens - Collection of data |
| DIN EN ISO 16773-3 EIS on coated and uncoated metallic specimens - Processing and analysis of data from dummy cells |
| DIN EN ISO 16866 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits |
| DIN EN ISO 16925 Determination of the resistance of coatings to pressure water-jetting |
| DIN EN ISO 17895 Determination of volatile organic compound (VOC) - Gas-chromatographic method with headspace injection for VOC determination |
| DIN EN ISO 18314-1 Practical colour measurement |
| DIN EN ISO 18314-2 Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power |
| DIN EN ISO 18314-3 Special indices |
| DIN EN ISO 20567-1 Determination of stone-chip resistance of coatings - Multi-impact testing |
| DIN EN ISO 21546 Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) |
| DIN EN ISO 21920-3 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators |
| DIN EN ISO 22479 Sulfur dioxide test in a humid atmosphere (fixed gas method) |
| DIN EN ISO 22557 Scratch test using a spring-loaded pen |
| DIN EN ISO 29862 Self adhesive tapes - Determination of peel adhesion properties |
| DIN EN ISO 7012-1 Determination of in-can free formaldehyde in water-dilutable coating materials |
| DIN EN ISO 7012-3 Determination of in-can isothiazolinones in water-dilutable coating materials with LC-UV |
| DIN EN ISO 22969 Determination of solar reflectance |
| DIN ISO 34-1 Determination of tear strength - Trouser test pieces |
| DIN ISO 12219-4 Method for the determination of the emissions of volatile organic compounds - Small chamber method |
| DIN ISO 12219-6 Method for the determination of the emissions of semi-volatile organic compounds at higher temperature - Small chamber method |
| DIN ISO 16000-3 Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air |
| DIN ISO 16000-6 Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air |
| DIN ISO 16000-33 Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) |
| DIN ISO 8690 Test method to assess the ease of decontamination of surface materials |
| ISO 3795 Determination of burning behaviour of interior materials |
| ISO 6452 Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 6721-4 Determination of dynamic mechanical properties - Tensile vibration |
| ISO 6721-5 Determination of dynamic mechanical properties - Flexural vibration |
| ISO 6721-11 Determination of dynamic mechanical properties - Glass transition temperature |
| ISO 8690 Test method to assess the ease of decontamination of surface materials |
| ISO 11359-2 Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 11503 Determination of resistance to humidity (intermittent condensation) |
| DIN CEN ISO/TS 19392-3 Determination and evaluation of resistance to rain erosion using water jet |
| ISO 12219-11 Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles |
| VDA 232-102 Cyclic corrosion testing of materials and components in automotive engineering |
| VDA 270 Determination of the odour characteristics of trim materials in motor vehicles |
| VDA 275 Determination of formaldehyde emission |
| VDA 276 Determination of the total concentration of hydrocarbon compounds in test chambers and vehicle interiors with FID |
| VDA 277 Determination of the emission of organic compounds |
| VDA 278 Thermal Desorption Analysis of Organic Emissions for the Characterization of Non-Metallic Materials for Automobiles |
| VDI 3862: Blatt 3 Measurement of aliphatic and aromatic aldehydes and ketones by DNPH method |
| VdL-RL 03 Determination of the formaldehyde concentration in water-thinnable coating materials and polymer dispersions |
| VDMA 24364 Testing for paint wetting impairment substances (LABS conformity) |
| SAE J 1351 Hot Odor Test for Materials Used in Vehicle Interior Cabins |
| SAE J 1756 Determination of the Fogging Characteristics of Interior Automotive Materials |
| SAE J 2334 Laboratory Cyclic Corrosion Test |
| SAE J 2527 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus |
| SAE J 2635 Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim |
| GMW3205 Determining the Resistance to Odor Propagation of Interior Materials |
| GMW3208 Rotary Abrasion Test, Taber Type |
| GMW3235 Fogging Characteristics of Trim Materials |
| GMW3286 Neutral Salt Spray (NSS) Test |
| GMW14124 Automotive Environmental Cycles |
| GMW14333 Fuel Resistance of Automotive Exterior Materials and Components |
| GMW14334 Chemical Resistance to Fluids |
| GMW14445 Sunscreen and Insect Repellant Resistance |
| GMW14458 Copper-Accelerated Acetic Acid Salt Spray (CASS) Test |
| GMW14650 Performance Requirements for Exterior Plastic Parts |
| GMW14665 Anodic Oxidation Coating on Aluminum |
| GMW14668 Minimun Performens Requirements for Decorative Chromium plated plastic parts |
| GMW14669 Organic Coating Performance for Exterior and Interior Metallic Components |
| GMW14674 Organic Coating for Cast Iron Parts |
| GMW14688 Determination of the scratch resistance of plastics (Method A) and the determination of the mar resistance of plastics (Method B) |
| GMW14698 Scratch Resistance of Organic Coatings and Self-adhesive Films |
| GMW14700 Stone Impact Resistance of Coatings |
| GMW14729 Procedures for High Humidity Test |
| GMW14799 Steering Wheel Diameter Measurement |
| GMW14829 Tape Adhesion Test for Paint Finishes |
| GMW14872 Cyclic Corrosion Laboratory Test |
| GMW14885 Painted Aluminum Road Wheels - Paint Performance Requirements |
| GMW15287 Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim |
| GMW15891 Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates |
| GMW16243 Decorative Exterior Decals - Foils |
| GMW16745 Water Jet Tests |
| GMW17138 Determination of Film Thickness |
| WSK-M2P159 Paint Performance, Aluminum Road Wheels |
| WSK-M3G178 Tape, Decorative, Pressure Sensitive, Exterior |
| WSK-M98P6 Finished Parts, Plastics, Exterior |
| WSS-M15J14 Paint, Two Component Color Coat for Plastic, Interior |
| WSS-M15J15 Paint, Two Component Color Coat for Plastic, Interior |
| WSS-M15P34 Part Performance, Hard Mold-In-Color Interior Components |
| WSS-M15P4 Assembly Performance, Hard Mold-In-Color Interior Components |
| WSS-M1P83 Decorative Chrome Electroplated Part Rerformance Requirements, ABS Or PC/ABS Substrates, General Exterior Use |
| WSS-M2P122 Paint Performance: Aluminum Wheels and Steel Wheels |
| WSS-M2P177 Paint Performance, Metal Substrates |
| WSS-M2P180 Paint Performance, Rigid Substrates, Exterior |
| WSS-M2P188 Paint Performance, Plastic Substrates, Interior |
| WSS-M2P190 Paint Performance, Visible/Non-Visible Interior Parts Metal Substrates |
| WSS-M4P13 Anodized Aluminum Performance |
| WSS-M5P8 Lighting Metalization, Plastic/Metal Substrates |
| WSS-M99P2222 Performance, Vehicle Interior Environment Quality Material / Component / Level Requirements |
| CETP 00.00-L-467 Laboratory Acclerated Cyclic Corrosion Test |
| FLTM AQ 110-01 Zink Phosphate Coverage Evaluation For Painted Steel Chassis Components |
| FLTM BI 103-01 Salt Spray Resistance Test for Painted Panels and Parts |
| FLTM BI 104-01 Water Immersion Test for Painted Parts and Panels |
| FLTM BI 106-01 Coating Adhesion Test |
| FLTM BI 109-01 Visual Appearance Evaluation |
| FLTM BI 110-01 Measurement of the Gloss of Paint Panels |
| FLTM BI 113-01 Water and Soap Spotting Test for Paint |
| FLTM BI 113-02 Resistance to Acid Spotting |
| FLTM BI 113-06 Test Method for Resistance to Perspiration |
| FLTM BI 113-08 Resistance to Sunscreen Lotion and Insect Repellent |
| FLTM BI 117-01 Thickness Measurement of Paint Films |
| FLTM BI 123-01 Painted Sheet Metal Corrosion Test |
| FLTM BI 123-03 Component Corrosion Test |
| FLTM BI 152-01 Resistange of Paint Films to Solvents |
| FLTM BI 157-06 High Performance Stone Chip Resistance Test New Rating Scale |
| FLTM BI 161-01 Mar Resistance Determination for Automotive Coatings |
| FLTM BI 168-01 Fluid Resistance of Chassis and Exterior Materials for Incidential Exposure |
| FLTM BN 103-01 Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking |
| FLTM BN 107-01 Crocking Test |
| FLTM BN 108-02 Resistance to Abrasion - Taber Abraser |
| FLTM BN 112-08 Soiling & Cleanability Test for Interior Trim Materials |
| FLTM BN 121-01 Bond Strength Test -Interior Trim Decorations |
| FLTM BN 151-01 Determation of 180 Degree Peel Adhesion Strength of Laminates |
| FLTM BN 155-01 Resistance to Simulated Finger Tip Abrasion |
| FLTM BO 101-05 Determination of Fuel Resistance of Plastic Parts |
| FLTM BO 131-03 Interior Odor Test |
| FLTM BO 151-01 Resistance to Low Temperature Impact |
| FLTM BO 160-04 Resistance of Painted Plastic Parts to High Pressure Cleaning Operations |
| FLTM BO 162-01 Resistance to Scratch and Marr |
| FLTM BZ 156-01 Determination of Formaldehyde, Aldehyde and Ketone Emissions |
| FLTM BZ 157-01 Determination of Organic Emissions by Headspace Gas Chromatography |
| TPJLR.52.002 Mar Resistance |
| TPJLR.52.058 Adhesive Bond Strength – 90 Degree and 180 Degree Peel Method |
| TPJLR.52.061 Paint Adhesion Test Method |
| TPJLR.52.153 Interior Painted Trim Resistance to Suncream |
| TPJLR.52.155 Fluid Spotting of Automotive Trim |
| TPJLR.52.156 Resistance of Interior Trim to Perspiration – Immersion Test |
| TPJLR.52.160 Resistance to Exterior Transit Protection Materials |
| TPJLR.52.210 CLEANABILITY TEST FOR INTERIOR TRIM Materials |
| TPJLR.52.252 Resistance to Neutral Salt Spray Corrosion Test |
| TPJLR.52.253 Test Cycle for Resistance to Humidity and Salt Spray |
| TPJLR.52.254 Calcium Chloride Accelerated Corrosion Test (Russian Mud Test) |
| TPJLR.52.265 Laboratory Accelerated Cyclic Corrosion Test |
| TPJLR.52.351 Resistance to Humidity - General |
| TPJLR.52.352 Resistance to Heat Ageing - General |
| TPJLR.52.353 Accelerated Environmental Ageing |
| TPJLR.52.456 Scrape Adhesion of Organic Coatings |
| TPJLR.52.458 Determination and Assessment of Odour from Interior Trim Materials, Components and Assemblies |
| TPJLR.52.554 Prohesion Corrosion Testing |
| TPJLR.52.561 Resistance Of Painted Exterior Parts To High Pressure Cleaning Operations |
| TPJLR.52.564 Water Immersion Test For Painted Parts And Panels |
| TPJLR.52.599 High Performance Stone Chip Resistance Test |
| TPJLR.52.656 Hydrolysis Test - Interior Painted Finishes |
| TPJLR.52.701 Determination of Crack Density of Microcracked or Pore Density of Micro-porous Chromium |
| AA-0026 Aging resistance test |
| AA-0053 Sun cream resistance of painted parts in the interior |
| AA-0055 Chemical resistance test of surfaces |
| AA-0061 Formaldehyde emission from non metallic materials and components, determined by HPLC |
| AA-0079 Determination of multi impact stone chip resistance |
| AA-0101 Reflectometer Value (Gloss) |
| AA-0129 Cass Testing ( Copper chloride-acetic acid salt spray testing) |
| AA-0134 Dry scratch resistance test using Crockmeter |
| AA-0136 Testing of Resistance to Pressure Water Jet (Steam Jet Test) |
| AA-0161 Color Measurement on Bodies and Hang On Parts |
| AA-0168 Filiform Corrosion on coated Aluminium |
| AA-0175 Galvanostatic Cathodic Polarization Corrosion Short-Term Test on Coated Steel |
| AA-0180 Cross hatch/cross-cut testing |
| AA-0203 Hydrolysis Test |
| AA-0213 Condensation Water Constant Atmosphere Test |
| AA-0224 Cyclic Corrosion Test |
| AA-0235 Accelerated weathering crack stability |
| AA-0236 Accelerated weathering colour stability |
| AA-0257 Measurement of structure and gloss on painted surfaces |
| AA-0264 Multi-stone chip test with salt water exposure |
| AA-0324 Saltspray - Test |
| AA-0326 SCAB corrosion test |
| AA-0340 Scalpel Cut on CFK-parts with Clearcoat |
| AA-0354 Technical Understanding of Color Measurement and the Measurement of Test Panels for Initial and Batch Release |
| AA-0403 Visual Color Comparison and Metamerism Test/coated test panels |
| AA-0471 Abrasion Resistance using the Abrex Test Equipment |
| GS 90011 Coating of parts made of metallic materials by means of organic materials |
| GS 93008-1 Substances of concern; Materials and components;Prohibited and declarable substances |
| GS 93008-4 Substances of concern; Emissions from materials and components |
| GS 93036 Light Weight Reinforced Thermoplast in the exterior |
| GS 94007 Painted plastic parts |
| GS 94015 Topcoats and painted parts for motorcycles |
| GS 97014-3 Emissions measurement with air exchange in a testing chamber - Determination of volatile, organic emissions from components, semi-finished products and materials |
| GS 97014-4 Emissions measurement with air exchange in a testingchamber: Determination of the olfactory behavior |
| GS 97017 Coatings on plastic parts - Electroplated plastic parts |
| GS 97034-1 Manual abrasion test |
| GS 97034-2 Fingernageltest |
| GS 97034-3 Shoe sole test |
| GS 97034-4 Color abrasion behavior |
| GS 97034-5 Resistance to cleaning and maintenance agents |
| GS 97034-6 Soiling behavior and cleaning ability |
| GS 97034-8 Determination of the scratch inclination |
| GS 97034-9 Scratch test |
| GS 97034-10 Scratch and abrasion resistance |
| GS 97034-12 Resistance against interior cleaners |
| GS 97102 PVD coatings on stainless steel surfaces and chromed surfaces |
| GS 97121-1 Inorganic surface coatings - Anodized aluminum parts for motorbikes |
| GS 97121-2 Inorganic surface coatings - Electroplated chrome coatings on motorbikes |
| PR 231 Seal system doors and lids |
| PR 292 Underbody Attachment |
| PR 303.6 Climate change test for equipment parts |
| PR 11737497 Seal system doors and lids |
| PR 11737558 Underbody Attachment |
| PR 11737567 Climate change test for equipment parts |
| QV 11738863 Test of surface condition of wheels |
| M 3018 Corrosion protection and coating systems for purchased parts, Truck and Bus |
| M 3022 Coating materials for components made of plastics |
| M 3082 Anti-corrosion waxes |
| M 3166 Powder Coating |
| M 3497 Coated and printed plastic components in the vehicle interior |
| MAN 272 Corrosion protection of steel containers and pipe fittings in the compressed air system |
| MAN 277 Adhesion test (Scratch Test) |
| DBL 3391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 7390 Primed metallic components as basis for the following finish coats |
| DBL 7397 Condensation-Water-Resistant Coating |
| MBN 61997 Modification to ISO 11997-3:2022-07: Execution, monitoring and documentation of corrosion tests |
| DBL 1000 Emissions and Odor in the Vehicle Interior |
| DBL 1111 Body parts made from press-hardened sheet steel |
| DBL 1172 Extruded AlMgSi Sections for Body Parts |
| DBL 1224 Requirements for Thermoplastic Synthetic Materials for Applications in the Interior |
| DBL 1232 Thermoplastics for Exterior Applications |
| DBL 1233 Long-fiber reinforced thermoplastics in the exterior, underbody and body |
| DBL 1262 Components Manufactured from Thermoplastic Elastomers |
| DBL 1287 Elastomer Materials for Components in Vehicles |
| DBL 1300 Coating / Paintwork of Plastic Parts in the Vehicle Exterior |
| DBL 1301 Scratch-resistant coatings of plastic parts on vehicle exteriors and coatings on plastic parts for headlamps |
| DBL 1302 Coating of Plastic Parts in Vehicle Interiors |
| DBL 1303 Decorative Coating of Plastic Parts using Plasma or Vacuum Deposition |
| DBL 1304 Decorative coating of metallic interior component parts with plasma or vacuum deposition (PVD) |
| DBL 1326 Nonwoven Fleece |
| DBL 1504 Volatile Corrosion Inhibition (VCI) Products |
| DBL 1551 Organic Coating for Metallic Parts on the Outer Side and Underside of the Vehicle and in the Engine Compartment |
| DBL 1630 Self-Adhesive Labels |
| DBL 1650 Parts Manufactured from Ferrous Materials with Inorganic Coating (Zinc Flake Coatings) |
| DBL 1651 Electrodeposited Zinc and Zinc Alloy Coatings for Components Manufactured from Ferrous Materials |
| DBL 1657 Anti-corrosion coatings for single-wall welded carbon steel tubing parts |
| DBL 1659 Electroplated metal parts with nickel, nickel-chromium or copper-nickel-chromium coatings |
| DBL 1665 Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings |
| DBL 1666 Galvanic single-part and drum coating of components for body shell applications, which are then given a KTL and/or top coat coating |
| DBL 1740 Fasteners with Metric Threads, Surface Protection and Supplementary Technical Delivery Conditions |
| DBL 1750 Aluminum Parts with Anodic Oxide Layers |
| DBL 1752 Decorative and Functional Composite Material Systems in the Interior |
| DBL 3390 Primed metallic components as basis for the following finish coats |
| DBL 3391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 5307 Flame retardant properties – Interior trim parts– Requirements and test specifications |
| DBL 5404 Parts Manufactured from Thermoplastics for the Direct and Indirect Areas of the Passenger Compartment and for Passenger Compartment Heating and Ventilation, Trim and Housings |
| DBL 5410 Parts made of thermoplastic materials for control devices, bearing and fastening elements, spacers |
| DBL 5416 Parts manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications |
| DBL 5417 Molded Parts Manufactured from Long-Fiber-Reinforced Thermoplastics, Hot Pressed |
| DBL 5418 Injection Molded Parts Manufactured from Fiber Reinforced Thermoplastics for Structural Requirements |
| DBL 5425 Coating / Paintwork of Plastic Parts in the Vehicle Exterior |
| DBL 5428 Scratch-resistant coatings of plastic parts on vehicle exteriors and coatings on plastic parts for headlamps |
| DBL 5430 Emissions and Odor in the Vehicle Interior |
| DBL 5471 Trim and moulded upholstery parts for vehicle interiors (composite components) |
| DBL 5490 Supply Specification: Plastic Components Manufactured from Recycled Materials |
| DBL 5562 Components Manufactured from Thermoplastic Elastomers |
| DBL 5587 Elastomer Materials for Components in Vehicles |
| DBL 5869 Supply Specification: Nonwoven fleece |
| DBL 6994 Volatile Corrosion Inhibition (VCI) Products |
| DBL 7381 Organic Coating for Metallic Parts on the Outer Side and Underside of the Vehicle and in the Engine Compartment |
| DBL 7382 Supply specification Coating/Painting of Metallic Parts in Vehicle interior |
| DBL 7384 Coating of Plastic Parts in Vehicle Interiors |
| DBL 7391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 7402 Decorative Coating of Plastic Parts using Plasma or Vacuum Deposition |
| DBL 7403 Decorative coating of metallic interior component parts with plasma or vacuum deposition (PVD) |
| DBL 8230 Self-Adhesive Labels |
| DBL 8427 Anti-corrosion coatings for single-wall welded carbon steel tubing parts |
| DBL 8440 Parts Manufactured from Ferrous Materials with Inorganic Coating (Zinc Flake Coatings) |
| DBL 8451 Electrodeposited Zinc and Zinc Alloy Coatings for Components Manufactured from Ferrous Materials |
| DBL 8459 Electroplated metal parts with nickel, nickel-chromium or copper-nickel-chromium coatings |
| DBL 8465 Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings |
| DBL 9202 Decorative and Functional Composite Material Systems in the Interior |
| DBL 9440 Fasteners with Metric Threads, Surface Protection and Supplementary Technical Delivery Conditions |
| MBN 10473-1 Measurement of Colors |
| MBN 10473-2 Technical Data for Color Measurement |
| MBN 10476 Visual Color Assessment of Painted Bodies, Add-On Parts and Metal Sheets in the Exterior |
| MBN 10494-1 Paint Test Methods – Part 1: General Requirements |
| MBN 10494-2 Paint Test Methods – Part 2: Testing of Paints in Wet Condition |
| MBN 10494-3 Paint Test Methods – Part 3: Processing Tests |
| MBN 10494-4 Paint Test Methods – Part 4: Optical Tests |
| MBN 10494-5 Paint Test Methods – Part 5: Technical-Mechanical Tests |
| MBN 10494-6 Paint Test Methods – Part 6: Climatic Tests |
| MBN 10494-7 Paint Test Methods – Part 7: Resistance to Chemicals, Test Mixtures and Test Concentrates |
| MBN 10494-8 Paint Test Methods – Part 8: Adhesion of Adhesives on the Coating |
| MBN 10494-9 Paint Test Methods – Part 9: Special Test Methods for Electrodeposition Coats in Wet Condition |
| MBN 10494-10 Paint Test Methods – Part 10: Special Test Methods for Electrodeposition Coats in Dry Condition |
| MBN 10514-2 Appearance - Part 2: Measurement methods for painted surfaces |
| MBN 10518 Test Specifications for Ensuring the Adhesion of Assembly Bonds |
| MBN 10526 Test Methods for Self-Adhesive Components |
| MBN 50306 Electric and Electronic Components in Motor Vehicles – Environmental Requirements and Tests |
| MBN 50473 Measurement of Colors |
| MBN 50476 Visual Color Assessment of Painted Bodies, Add-On Parts and Metal Sheets in the Exterior |
| MBN 50494-5 Paint Test Methods – Part 5: Technical-Mechanical Tests |
| MBN 50494-6 Paint Test Methods – Part 6: Climatic Tests |
| MBN 50494-8 Paint Test Methods – Part 8: Adhesion of Adhesives on the Coating |
| MBN 50526 Test Methods for Self-Adhesive Components |
| MBN 51000-2 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 2: Approval processes |
| MBN 51000-3 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 3: Other Tests |
| MBN 51000-4 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 4: Thermal Tests |
| MBN 51000-6 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 6: Mechanical Tests |
| MBN LV124-2 Electric and Electronic Components in Motor Vehicles – Environmental Requirements and Tests |
| 37-00-081 Passenger compartment - Material and Part Emissions |
| 47-01-002 Electroplating decorative Coating - Chrome Plating on Plastic Parts |
| 47-03-005 Paint Coatings and Foils by Dipping for Internal Plastic Parts |
| D15 1343 Coloured Materials Visual Comparison of Colours In Light Chamber |
| D17 2028 Corrosion Test by automatic Change of Phases of Salt Spray, Drying and Humidity (Ecc1) |
| D24 1702 Paints Resistence to Gritting by Shot Blasting |
| D25 1413 Paint Coatings, Plastics and Rubbers Gloss Measurement |
| D27 1911 Rubber and Plastic Paint Coatings artificial ageing Using Weatherometer |
| D40 3004 Analysis of Formaldehyde and other Carbonyl compouds in the equipment of vehicle passanger compartment by Liquid Chromatography |
| D40 3004 Analysis of Formaldehyde and other Carbonyl compounds |
| D41 1126 Resistance to tearing |
| D42 1775 Interior and Exterior Plastic Parts Resistance to Scoring by abrasion |
| D42 2036 External painted parts – Scratch resistance by abrasion |
| D42 3109 Passenger compartment; Evaluation of the VOC Quantity by thermal Desorption/GC/MS |
| D44 1900 Plastics - Resistance to Marking (Resistance to Scoring Through Polishing) |
| D45 1727 Interior Trim Materials and passanger compartment parts, FOGGING |
| D45 1837 Paint coating on plastic parts and mass staining of colored materials by automotive fluids |
| D47 1165 Accelerated aging |
| D47 1309 Ageing accord. to given climatic cycles |
| D49 3001 Odour Emissions, Intensity Evaluation and global Odour Characterisation |
| D51 3022 Right-angle peeling |
| BSDM0500 Flammability test method for interior materials |
| BSDM0503 Fogging test method for non-metallic materials |
| BSDM0505 Smell qualitiy of non- metallic materials |
| TSM0503G Fogging test method for non-metallic materials |
| TSM0505G Smell qualitiy of non- metallic materials |
| TSH3131G Paint film quality of coated exterior parts |
| TSH 3122G Coating quality for aluminum wheel disk |
| TSM5743G Polypropylene foam materials for the spacer of luggage room |
| TSH1503G Grid test |
| TSH1505G Determination of water resistance in accordance |
| TSH1552G Determination of resistance to salt spray |
| TSH1555G Determination of resistance to corrosion of damper contact area |
| TSH1511G Thermal cyclic test |
| TSH1503G Heat resistance |
| STD 1024,2844 Peel adhesion (180°) |
| STD 1024,7134 Abrasion-Organic materials |
| STD 1024,7135 Abrasion resistance- Abrasion resistant coatings |
| STD 1026,1122 Heat resistance -Plastic |
| STD 1026,5172 Determination of colour in colour-matching booth |
| STD 1026,8177 Chemical resistance - Surface treatments |
| STD 1026,8201 Grey scale - Determination of changes in colour |
| STD 1026,8202 Grey scale for assessing staining |
| STD 1026,8432 Colour fastness to rubbing - Rubber, plastics and textiles |
| STD 1026,8433 Colour fastness to rubbing with organic solvents -textiles |
| STD 1026,8434 Colour fastness to rubbing- paint and enamels |
| STD 1027,3375 Moisture resistance in tropical cabinet |
| STD 1027,6132 Test liquids |
| STD 1029,5471 Adhesion, water spraying under high pressure Paints and enamels |
| STD 1029,5472 Adhesion, cross-cut test Paints and enamel |
| STD 1029,5473 Adhesion -Paints and enamels |
| STD 121-0001 Painting Y 600 |
| STD 121-0002 Painting Y 650 |
| STD 1266,1 Decals 96610 -Self-adhesive, permanent application |
| STD 420-0003 Fogging organic materials |
| STD 423-0009 Adhesion -Paints and enamels, knife technique |
| STD 423-0012 Adhesion, cross-cut test- Paints and enamels |
| STD 423-0014 Accelerated Corrosion Test |
| STD 423-0015 Adhesion, water spraying under high pressure Paints and enamels |
| STD 423-0018 Moisture resistance in tropical cabinet Chemical materials |
| STD 423-0024 Extensibility- paints and panels |
| STD 423-0030 Scratch resistance, Erichsen Pen- Organic materials |
| STD 423-0037 Colour fastness to rubbing-Rubber, plastics, textiles, paints and varnishes |
| STD 423-0069 Accelerated corrosion test, version II (ACT II) |
| STD 429-0001 Odour of trim materials in vehicles-organic materials |
| STD 429-0002 Formaldehyde emission |
| STD 429-0003 Determination of organic emissions |
| STD 5751,5 Painting Y 500 - Metal substrates |
| STD 5751,55 Painting Y 550- Plastics substrates |
| VCS 1024,11419 Extensibility |
| VCS 1024,31139 Erichsen Pen |
| VCS 1024,31239 Hardness |
| VCS 1024,71349 Abrasion |
| VCS 1025,89 Determination of film thickness |
| VCS 1026,51729 Assessment of colour in light booth |
| VCS 1026,52729 Gloss |
| VCS 1026,52749 Paint surface texture |
| VCS 1026,81779 Chemical resistance |
| VCS 1026,81819 Chemical resistance under heat influence |
| VCS 1026,84349 Colour fastness to rubbing |
| VCS 1027, 2739 Formaldehyde emission |
| VCS 1027,13729 Accelerated outdoor exposure |
| VCS 1027,1449 Accelerated corrosion test, version II – ACT II |
| VCS 1027,149 Accelerated corrosion test |
| VCS 1027,2719 Fogging organic materials |
| VCS 1027,2729 Odour of trim materials in VEHICLE |
| VCS 1027,2749 Determination of organic emissions |
| VCS 1027,33759 Moisture resistance in tropical cabinet |
| VCS 1027,339 Accelerated light exposure of exterior coatings |
| VCS 1029,54719 Adhesion, water spraying under high-pressure |
| VCS 1029,54729 Adhesion, cross-cut test |
| VCS 1029,54739 Adhesion |
| VCS 5031,19 Flammability of interior materials |
| VCS 5737,19 Cathodically protective surface treatment with friction requirement Y100 |
| VCS 5751,5119 Paint refinishing system |
| VCS 5751,59 Paint systems |
| PV 3.3.2 Paints and Varnishes; Light Transmittance Measurements on Paint Materials to Determine the Binding Minimum Coating Thickness |
| PV 3.10.7 Testing for Substances That Impair Paint Wetting Ability |
| PV 3.14.7 Test of Stone-Chip Resistance according to DIN EN ISO 20567-1 |
| PV 4.10.4 Strength Testing of Paintwork Structure. Tensile Shear Test of Adhesive Joints on Painted Sheet Metal |
| PV 12.35 Testing of Tensile Shear Strength |
| PV 1015 Bimetallic Corrosion Caused by Elastomers and Plastics Connected to Light Metals - Specific Volume Resistance Testing |
| PV 1058 Determination of the Micro-Crack Pattern on Chrome-Plated Surfaces |
| PV 1063 Determining the Micropore Density |
| PV 1065 Determining Differences of Potential and Layer Thicknesses of Nickel Coatings |
| PV 1073 Corrosion Resistance of Chrome Surfaces |
| PV 1200 Testing the Environmental Cycle Resistance (80 °C/-40 °C) |
| PV 1207 Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1208 Corrosion Test (SWAAT) |
| PV 1209 Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1210 Corrosion Test (Body and Add-On Parts/Hang-On Parts) |
| PV 1300 PVC and PVC copolymer; thermal stability test |
| PV 1303 Xenon Arc Light Aging of Vehicle Interior Parts |
| PV 1306 Exposure Test for Determining the Tackiness of Polypropylene Parts |
| PV 1401 Lubricating Oils - Testing of Corrosion Protection Behavior |
| PV 1503 Pressure Washer Test |
| PV 2005 Environmental Cycle Resistance Testing of Special Parts, Neww Developments, and Solutions |
| PV 2034 Non-Metalic Planar Materials; Floating Roller Peel Test |
| PV 3015 Fogging Behavior of Materials Used in the Vehicle Interior, Gravimetric Determination of Condensable Components |
| PV 3307 Elastomer Components; Plastic and Elastic Deformability |
| PV 3330 Elastomer O-rings; Compression Set (Plastic Deformation) |
| PV 3341 Determination of Emission of Organic Compounds |
| PV 3356 Testing of the Soiling and Cleaning Behavior |
| PV 3357 Sound Insulation Materials; Behavior on Flame Exposure with a Burner; Surface and Edge Flame Exposure Test |
| PV 3381 Determination of Bending Stiffness of Textile, Flat semi-finished products for Material characterization |
| PV 3900 Odor Test |
| PV 3903 Measurement of Bending Stiffness |
| PV 3905 Organic Materials; Ball Drop Test |
| PV 3906 Testing the Abrasion Behavior |
| PV 3919 Nonwoven Fabric Sound Insulation; Determining Compression Stress |
| PV 3922 Planar Fabrics and Molded Parts; Oil- and Water-Repellent Behavior |
| PV 3925 Polymer Materials; Determination of Formaldehyde Emission; Measurement by a Modified Bottle Method |
| PV 3929 Weathering in Dry, Hot Climate |
| PV 3930 Weathering in Humid, Hot Climate |
| PV 3936 Polymer Materials; Testing the Resistance to Constituents of Blowby Gases |
| PV 3942 Emission Behavior of Parts, Components, and Semi-Finished Products for the Vehicle Interior; Testing Using the DUT Chamber Method |
| PV 3952 Determination of the Scratch Resistance of Surfaces without Finish Treatment in Vehicle Interiors and Exteriors |
| PV 3954 Determination of Bending Stiffness |
| PV 3961 Trim Cover Material; Hook Fastener Test |
| PV 3962 Coated Metal Gaskets; Determination of Scratch Resistance |
| PV 3964 Testing of Cream Resistance |
| PV 3965 Visual Color Matching according to DIN EN ISO 3668 |
| PV 3966 Stress Whitening Properties (Ball Drop Test) |
| PV 3968 Soiling behavior |
| PV 3974 Determination of the Mar Resistance of Surfaces without Finish Treatment in Vehicle Interiors And Exteriors |
| PV 3983 Testing Resistance to Agents in Conjunction with Mechanical Stresses |
| PV 3987 Scrub Resistance (Micro-Scratch Resistance) of High-Gloss Surfaces in the Vehicle Interior |
| PV 3989 Low-Temperature Behavior of Plastic Components; Ball Drop Test |
| PV 3991 Structured Surfaces; Skin Abrasion Testing |
| PV 7201 Testing of Filiform Corrosion Properties |
| PV 8610 INKA test (Ingolstadt Corrosion and Aging Test); testing of components |
| TL 152 Powder Paint for Cylinder Block and Crankcase |
| TL 182 Duplex Coating on Aluminum Parts |
| TL 187 Nitrocarburized and Coated Ball Studs |
| TL 191 Paint Finish of Exhaust System Parts |
| TL 196 Duplex Coating Systems for Small Parts and Bulk Parts |
| TL 203 Decorative Chrome Plating (Ni-Cr Coatings) on Metal Components |
| TL 207 Reflective Coatings on Enclosed Plastic Reflectors and Coatings in the Interior of Light Units |
| TL 211 Coating of Plastic Exterior Parts |
| TL 212 Oxide Coatings on Aluminum Parts |
| TL 214 Coating with Zinc-Dust Paint |
| TL 216 Corrosion Protection on Half Shafts |
| TL 217 Zinc Coatings |
| TL 218 Body Color Multi-Layer Paint on Metallic Body Skin Parts |
| TL 222 Corrosion Protection Coatings for Brake Pipes |
| TL 226 Paintwork on Materials of Vehicle Interior Equipment |
| TL 227 Single-Layer Paint Coating of Zinc-Coated Metal Surfaces |
| TL 233 Non-Electrolytically Applied Zinc Flake Coatings with an Organic Top Coat |
| TL 238 Surface Protection, Steel Rims |
| TL 239 Surface Protection, Alloy Wheel |
| TL 244 Zinc/Nickel Alloy Coatings |
| TL 245 Non-Electrolytically Applied Zinc Flake Coatings |
| TL 256 Powder Coating on Metal Surfaces |
| TL 260 Paintwork of Metal Surfaces |
| TL 262 Paint Finish of Chassis Parts |
| TL 526 Plasticized PVC, Weather-Resistant |
| TL 527 ABS Graft Polymer, Finished Parts |
| TL 528 Chrome-Plated Plastic Parts |
| TL 529 Hydrolysis-Resistant Finished Parts Made of Thermoplastic Polyurethane |
| TL 591 Organic Glass for Light Units |
| TL 874 Radiator |
| TL 1010 Materials for Interior Equipment; Flammability Requirements |
| TL 1011 Flammability of Non-Metallic Materials |
| TL 52018 Double-Sided Foam Adhesive Tape |
| TL 52038 Adhesive Labels |
| TL 52065 Elastomer Sealing Material Made of Cellular Rubber |
| TL 52231 ABS and PC Polymer Blends |
| TL 52288 Polyamide, Mineral-Reinforced, Finished Parts |
| TL 52310 Microfiber Seat Cover Material and Decorative Material |
| TL 52311 ASA for Components in the Vehicle Exterior Area |
| TL 52388 Polypropylene for Use in the Vehicle Interior |
| TL 52437 Plastic Outer Lenses with Protective Coating |
| TL 52451 Paintwork of Decorative Metallic Add-on Parts on the Exterior |
| TL 52452 Polypropylene with Increased Crystallization |
| TL 52476 POM, Finished Parts for the Vehicle Interior |
| TL 52486 AEM for Charge Air Hoses |
| TL 52499 Linings made of thermoplastic bonded mixed fiber molding material |
| TL 52622 Thermoplastic Elastomers in Hard/Soft Compounds for the Exterior Area |
| TL 52625 Plastic Front-End Carrier |
| TL 52629 Decorative Materials for Luggage Compartment and Load Compartment |
| TL 52631 Visible Trim Parts for the Vehicle Exterior Made of PP Compounds |
| TL 52693 TPE Floor Mat |
| TL 52649 Wheel Housing Liner; Commercial Vehicle Wheel Housing |
| TL 52660 Underbody Applications; Engine/Motor Encapsulation, Stone Guard, cd-Enhancing Panels in Thermoplastic Design |
| TL 52662 Molded Parts Made of Needle-Punched Nonwoven |
| TL 52671 Hochglanzkunststoffe (außer ASA) im Exterieurbereich |
| TL 52678 NR for Wiper Blades |
| TL 52680 Components Made of Long-Fiber-Reinforced or Continuous-Filament-Reinforced Plastic Composites (FRP) |
| TL 52688 Polypropylene for Battery Boxes |
| TL 52704 Static Body Seals and Molded Corners Made of EPDM |
| TL 52711 Underbody Applications – Engine Encapsulations, Transmission Encapsulations, and cd-Enhancing Underbody Panels Made of LWRT |
| TL 52726 Plastic High-Gloss Applications in the Exterior Area |
| TL 52742 Wheel Trim Add-on Parts |
| TL 82086 Refrigerant Heat Exchanger |
| TL 82132 Charge Air Coolers |
| TL 82316 R134a/R1234yf Refrigerant Lines |
| TL 82406 Heater Cores |
| TL 82436 Hood Hinge - Single-Joint and Multiple-Joint |
| TL 82448 Brake Pipe - Flare Load Capacity, Reverse Bend Test |
| VW 2.8.1 Elastomers; Materials Requirements and Testing |
| VW 13750 Surface Protection for Metal Parts |
| VW 44045 Polypropylene, Finished Parts |
| VW 50002 Test Agents - Materials Compatibility |
| VW 50123 Thermoplastic Elastomers |
| VW 50125 Polyamide 6 for Finished Parts in the Vehicle Interior |
| VW 50133 PA66 for Finished Parts Outside the Vehicle Interior |
| VW 50134 PA6 for Finished Parts Outside the Vehicle Interior |
| VW 50136 PBT for Finished Parts Outside the Vehicle Interior |
| VW 50164 Methods for Testing and Releasing VCI Packaging Materials |
| VW 50180 Emission Behavior |
| VW 50185 Resistance to Open-Air Weathering of the Whole Vehicle and of Parts |
| VW 50190 Colorimetric Evaluation of Exterior Automotive Paint Finishes |
| VW 50194 Definition of Tolerances and Evaluation of the Differences in the Sparkling and Graininess of Effect Paints |
| VW 50195 Colorimetric Evaluation of Exterior Automotive Paint Finishes |
| VW 50196 Decorative Exterior Parts in Non-Body Color |
| VW 51500-1 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 1: Modified Climate Change Test |
| VW 51500-2 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 2: Corrosion Protection Requirements as per Modified Environmental Cycle Test |
| VW 51500-3 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 3: Corrosion Classes, Zone Classification, and Evaluation |
| VW 51780 Emission behavior |
| VW 80000 Electric and Electronic Components in Motor Vehicles up to 3.5 t |
| VW 96135 Interior / Exterior - Surface Decors ; Plastic Components with Electrolytically Deposited Metal Surfaces |
| VW 96136 Exterior; Decorative Foil / Protective Foil / Decorative Foil with Protective Function. |
| VW 96183 Interior ; Surface Decors - Painting/ Pad Printing/ Hot Stamping |
| VW 96197 Adhesive films and tapes for vehicle interiors and exteriors |
| VW 96232 Tufting Carpet for Floor Covering, Textile Covers, and Mats |
| VW 96238 Interior; Parts and Their Surfaces; Requirements and Tests |
| VW 96379 Climatic Test |
| VW 96380 Modified Environmental Cycle Test |
| VW 96383 Limiting Surface Flaws - Vehicle Interior |
| VW 96408 Adhesive and Sealing Materials; Peel Test |
| VW 96453 Absorbent Material made of Fiber Nonwoven for the Interior |
| VW 96457 Paintwork on Plastic Exterior Parts and Fiber-Reinforced Plastics |
| LAH.000.825.A Underbody textile LWRT |
| DBS 918015 Cleaning and care products for rail vehicles |
| DBS 918016 Graffiti remover for rail vehicles |
| DBS 918020 Self-adhesive films for outdoor labelling and advertising on rail vehicles |
| DBS 918021 Self-adhesive films for interior labelling on rail vehicles |
| DBS 918300 Coating materials for rail vehicles |
| DBS 918340 Powder coatings for rail vehicles |
| TL 8010-0001 Primers for Bundeswehr equipment |
| TL 8010-0002 Top coating materials for Bundeswehr equipment |
| STANAG 4360 / AEP-64 Paint systems for the resistance against corrosion, chemical agents and decontaminants |
| AECTP 300 Climatic environmental tests |
| MIL-STD-810 Environmental engineering considerations and laboratory tests |
Our standards
from A to Z
This list of our standards is constantly being updated and expanded.
Questions about specific standards or procedures can be asked directly to our employees by phone or sent via e-mail.
| ASTM B 117 Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM B 368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) |
| ASTM B 764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) |
| ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 523 Standard Test Method for Specular Gloss |
| ASTM D 968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive |
| ASTM D 1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 2369 Standard Test Method for Volatile Content of Coatings |
| ASTM D 2370 Standard Test Method for Tensile Properties of Organic Coatings |
| ASTM D 2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
| ASTM D 3330 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
| ASTM D 4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM D 5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM G 69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
| ASTM G 85 Standard Practice for Modified Salt Spray (Fog) Testing |
| DIN 6167 Description of yellowness of near-white or near-colourless materials |
| DIN 6175 Colour tolerances for automotive coatings - Solid and effect coatings |
| DIN 25415 Paints and varnishes - Determination of abraison behaviour |
| DIN 30646 Self-adhesive signs - Technical delivery conditions for signs made of plastic film, aluminium foil and paper |
| DIN 50018 Testing in a saturated atmosphere in the presence of sulfur dioxide |
| DIN 51453 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method |
| DIN 53019-1 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 1: Principles and measuring geometry |
| DIN 53100 Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials |
| DIN 53435 Bending test and impact test on dynstat test specimens |
| DIN 53504 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test |
| DIN 55635 Cyclic corrosion testing of coating systems on materials and components in automotive construction |
| DIN 55665 Natural weathering of coatings - weathering location: Magdeburg |
| DIN 55670 Method for testing paint coatings for pores and cracks using high-voltage |
| DIN 75200 Determination of burning behaviour of interior materials in motor vehicles |
| DIN 75201 Determination of the fogging characteristics of trim materials in the interior of automobiles |
| DIN EN 927-3 Coating materials and coating systems for exterior wood - Natural weathering testweathering location: Magdeburg |
| DIN EN 927-5 Coating materials and coating systems for exterior wood - Assessment of the liquid water permeability |
| DIN EN 927-6 Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| DIN EN 1062-3 Coating materials and coating systems for exterior masonry and concrete - Determination of liquid water permeability |
| DIN EN 1062-11 Coating materials and coating systems for exterior masonry and concrete - Methods of conditioning before testing |
| DIN EN 1464 Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 1465 Determination of tensile lap-shear strength of bonded assemblies |
| DIN EN 1542 Measurement of bond strength by pull-off |
| DIN EN 1767 Infrared analysis |
| DIN EN 3665 Filiform corrosion resistance test on aluminium alloys |
| DIN EN 13130-4 Determination of 1,3-butadiene in plastics |
| DIN EN 13300 Paints and varnishes for interior walls and ceilings |
| DIN EN 13523-17 Adhesion of strippable films |
| DIN EN 13523-27 Resistance to humid poultice (Cataplasm test) |
| DIN EN 16516 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| DIN EN 16866 Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| DIN EN 20105-A02 Grey scale for assessing change in colour |
| DIN EN 60068-2-14 Environmental testing - Test N: Change of temperature |
| DIN EN 60068-2-70 Abrasion of markings and letterings caused by rubbing of fingers and hands |
| DIN EN IEC 60079-0 Explosive atmospheres - Surface resistivity |
| DIN EN 60216-1 Thermal endurance properties - Ageing procedure |
| DIN EN 60216-2 Thermal endurance properties - Choice of test criteria |
| DIN EN 60216-5 Thermal endurance properties - Determination of relative temperature index (RTI) |
| DIN EN 60695-11-10 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| DIN EN 61074 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by DSC |
| DIN EN 61340-2-1 Ability of materials and products to dissipate static electric charge |
| DIN EN ISO 105-A03 Grey scale for assessing staining |
| DIN EN ISO 105-B02 Colour fastness to artificial light: Xenon arc fading lamp test |
| DIN EN ISO 105-B06 Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
| DIN EN ISO 105-X12 Colour fastness to rubbing (Crockmeter-Test) |
| DIN EN ISO 178 Determination of flexural properties |
| DIN EN ISO 179-1 Determination of Charpy impact properties |
| DIN EN ISO 527-1 Determination of tensile properties - General principles |
| DIN EN ISO 527-2 Determination of tensile properties - Test conditions for moulding and extrusion plastics |
| DIN EN ISO 527-3 Determination of tensile properties - Test conditions for films and sheets |
| DIN EN ISO 527-4 Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| DIN EN ISO 527-5 Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites |
| DIN EN ISO 604 Plastics - Determination of compressive properties |
| DIN EN ISO 844 Rigid cellular plastics - Determination of compression properties |
| DIN EN ISO 1183-1 Methods for determining the density of non-cellular plastics - Immersion method, |
| DIN EN ISO 1456 Appendix A - Determination of cracks and pores in chromium coatings |
| DIN EN ISO 1456 Appendix B - Test method for determining the layer thickness |
| DIN EN ISO 1456 Appendix E - STEP Test |
| DIN EN ISO 1463 Measurement of coating thickness - Microscopical method |
| DIN EN ISO 1518-1 Determination of scratch resistance - Constant-loading method |
| DIN EN ISO 1519 Bend test - cylindrical mandrel |
| DIN EN ISO 1520 Cupping test |
| DIN EN ISO 1522 Pendulum damping test |
| DIN EN ISO 1798 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break |
| DIN EN ISO 2177 Measurement of coating thickness - Coulometric method by anodic dissolution |
| DIN EN ISO 2178 Measurement of coating thickness - Magnetic method |
| DIN EN ISO 2360 Measurement of coating thickness - Amplitude-sensitive eddy-current method |
| DIN EN ISO 2409 Cross-cut test |
| DIN EN ISO 2808 Method 6A - cross section |
| DIN EN ISO 2808 Method 6B - wedge cut |
| DIN EN ISO 2808 Method 7B.2 - Magnetic field change, magnetic inductive method |
| DIN EN ISO 2808 Method 7C - Eddy current method |
| DIN EN ISO 2810 Natural weathering of coatings - Exposure location: Magdeburg |
| DIN EN ISO 2811-1 Determination of density - Pycnometer method |
| DIN EN ISO 2812-1 Determination of resistance to liquids - Immersion in liquids other than water |
| DIN EN ISO 2812-2 Determination of resistance to liquids - Water immersion method |
| DIN EN ISO 2812-3 Determination of resistance to liquids - Method using an absorbent medium |
| DIN EN ISO 2812-4 Determination of resistance to liquids - Spotting methods |
| DIN EN ISO 2813 Determination of gloss value at 20°, 60° and 85° |
| DIN EN ISO 2815 Buchholz indentation test |
| DIN EN ISO 2884-1 Determination of viscosity using rotary viscometers - Cone-and-plate viscometer operated at a high rate of shear |
| DIN EN ISO 3219-1 Rheology - Part 1: Vocabulary and symbols for rotational and oscillatory rheometry |
| DIN EN ISO 3219-2 Rheology - Part 2: General principles of rotational and oscillatory rheometry |
| DIN EN ISO 3251 Determination of non-volatile-matter content |
| DIN EN ISO 3668 Visual comparison of colour of paints |
| DIN EN ISO 4532 Determination of the resistance of enamelled articles to impact - Pistol test |
| DIN EN ISO 4623-1 Determination of resistance to filiform corrosion - Steel substrates |
| DIN EN ISO 4623-2 Determination of resistance to filiform corrosion - Aluminium substrates |
| DIN EN ISO 4624 Pull-off test for adhesion |
| DIN EN ISO 4628-1 Designation of quantity and size of defects, and of intensity of uniform changes in appearance |
| DIN EN ISO 4628-2 Assessment of degree of blistering |
| DIN EN ISO 4628-3 Assessment of degree of rusting |
| DIN EN ISO 4628-4 Assessment of degree of cracking |
| DIN EN ISO 4628-5 Assessment of degree of flaking |
| DIN EN ISO 4628-6 Assessment of degree of chalking by tape method |
| DIN EN ISO 4628-7 Assessment of degree of chalking by velvet method |
| DIN EN ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe or other artificial defect |
| DIN EN ISO 4628-10 Assessment of degree of filiform corrosion |
| DIN EN ISO 4892-2 Methods of exposure to laboratory light sources - Xenon-arc lamps |
| DIN EN ISO 4892-3 Methods of exposure to laboratory light sources - Fluorescent UV lamps |
| DIN EN ISO 6270-1 Determination of resistance to humidity - Condensation (single-sided exposure) |
| DIN EN ISO 6270-2 Determination of resistance to humidity - Condensation (in-cabinet exposure with heated water reservoir) |
| DIN EN ISO 6272-1 Rapid-deformation (impact resistance) tests |
| DIN EN ISO 6383-1 Determination of tear resistance - Trouser tear method |
| DIN EN ISO 6504-3 Determination of hiding power of paints for masonry, concrete and interior use |
| DIN EN ISO 6721-1 Determination of dynamic mechanical properties - Part 1: General principles |
| DIN EN ISO 6860 Bend test (conical mandrel) |
| DIN EN ISO 6892-1 Metallic materials - Tensile testing - Method of test at room temperature |
| DIN EN ISO 7783 Determination of water-vapour transmission properties - Cup method |
| DIN EN ISO 7784-1 Determination of resistance to abrasion - Method with abrasive-paper covered wheels and rotating test specimen |
| DIN EN ISO 7784-2 Determination of resistance to abrasion - Method with abrasive rubber wheels and rotating test specimen |
| DIN EN ISO 8130-2 Determination of density by gas comparison pycnometer |
| DIN EN ISO 8130-13 Particle size analysis by laser diffraction |
| DIN EN ISO 8295 Determination of the coefficients of friction |
| DIN EN ISO 8503-2 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure |
| DIN EN ISO 9073-3 Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method |
| DIN EN ISO 9117-3 Surface-drying test using ballotini |
| DIN EN ISO 9117-5 Surface-drying test using Modified Bandow-Wolff test |
| DIN EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests |
| DIN EN ISO 9466 Test methods for the corrosion protection of coatings for rail vehicles |
| DIN EN ISO 11357-2 DSC - Determination of glass transition temperature and step height |
| DIN EN ISO 11357-3 DSC - Determination of temperature and enthalpy of melting and crystallization |
| DIN EN ISO 11357-4 DSC - Determination of specific heat capacity |
| DIN EN ISO 11357-5 DSC - Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| DIN EN ISO 11357-8 DSC - Determination of thermal conductivity |
| DIN EN ISO/CIE 11664-4 CIE 1976 L*a*b* colour space |
| DIN EN ISO 11890-1 Determination of volatile organic compound (VOC) content - Difference method |
| DIN EN ISO 11890-2 Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Gas-chromatographic method |
| DIN EN ISO 11997-1 Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humid |
| DIN EN ISO 11997-2 Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light |
| DIN EN ISO 11997-3 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction |
| DIN EN ISO 11998 Determination of wet-scrub resistance and cleanability of coatings |
| DIN EN ISO 12944-6 Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods |
| DIN EN ISO 12944-9 Corrosion protection of steel structures by protective paint systems - Protective paint systems and laboratory performance test methods for offshore and related structures |
| DIN EN ISO 13934-1 Determination of maximum force and elongation at maximum force using the strip method |
| DIN EN ISO 13937-2 Determination of tear force of trouser-shaped test specimens |
| DIN EN ISO 14125 Determination of flexural properties |
| DIN EN ISO 14577-1 Instrumented indentation test for hardness and materials parameters - Test method |
| DIN EN ISO 14577-4 Instrumented indentation test for hardness and materials parameters - Test method for metallic and non-metallic coatings |
| DIN EN ISO 15711 Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| DIN EN ISO 16000‑9 Determination of emission of volatile organic compounds from building products and furnishing - Emission test chamber method |
| DIN EN ISO 16276-1 Pull-off testing |
| DIN EN ISO 16276-2 Cross-cut testing and X-cut testing |
| DIN EN ISO 16474-2 Methods of exposure to laboratory light sources - Xenon-arc lamps |
| DIN EN ISO 16474-3 Methods of exposure to laboratory light sources - Fluorescent UV lamps |
| DIN EN ISO 16773-2 EIS on coated and uncoated metallic specimens - Collection of data |
| DIN EN ISO 16773-3 EIS on coated and uncoated metallic specimens - Processing and analysis of data from dummy cells |
| DIN EN ISO 16866 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits |
| DIN EN ISO 16925 Determination of the resistance of coatings to pressure water-jetting |
| DIN EN ISO 17895 Determination of volatile organic compound (VOC) - Gas-chromatographic method with headspace injection for VOC determination |
| DIN EN ISO 18314-1 Practical colour measurement |
| DIN EN ISO 18314-2 Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power |
| DIN EN ISO 18314-3 Special indices |
| DIN EN ISO 20567-1 Determination of stone-chip resistance of coatings - Multi-impact testing |
| DIN EN ISO 21546 Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) |
| DIN EN ISO 21920-3 Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators |
| DIN EN ISO 22479 Sulfur dioxide test in a humid atmosphere (fixed gas method) |
| DIN EN ISO 22557 Scratch test using a spring-loaded pen |
| DIN EN ISO 29862 Self adhesive tapes - Determination of peel adhesion properties |
| DIN EN ISO 7012-1 Determination of in-can free formaldehyde in water-dilutable coating materials |
| DIN EN ISO 7012-3 Determination of in-can isothiazolinones in water-dilutable coating materials with LC-UV |
| DIN EN ISO 22969 Determination of solar reflectance |
| DIN ISO 34-1 Determination of tear strength - Trouser test pieces |
| DIN ISO 12219-4 Method for the determination of the emissions of volatile organic compounds - Small chamber method |
| DIN ISO 12219-6 Method for the determination of the emissions of semi-volatile organic compounds at higher temperature - Small chamber method |
| DIN ISO 16000-3 Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air |
| DIN ISO 16000-6 Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air |
| DIN ISO 16000-33 Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) |
| DIN ISO 8690 Test method to assess the ease of decontamination of surface materials |
| ISO 3795 Determination of burning behaviour of interior materials |
| ISO 6452 Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 6721-4 Determination of dynamic mechanical properties - Tensile vibration |
| ISO 6721-5 Determination of dynamic mechanical properties - Flexural vibration |
| ISO 6721-11 Determination of dynamic mechanical properties - Glass transition temperature |
| ISO 8690 Test method to assess the ease of decontamination of surface materials |
| ISO 11359-2 Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 11503 Determination of resistance to humidity (intermittent condensation) |
| DIN CEN ISO/TS 19392-3 Determination and evaluation of resistance to rain erosion using water jet |
| ISO 12219-11 Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles |
| VDA 232-102 Cyclic corrosion testing of materials and components in automotive engineering |
| VDA 270 Determination of the odour characteristics of trim materials in motor vehicles |
| VDA 275 Determination of formaldehyde emission |
| VDA 276 Determination of the total concentration of hydrocarbon compounds in test chambers and vehicle interiors with FID |
| VDA 277 Determination of the emission of organic compounds |
| VDA 278 Thermal Desorption Analysis of Organic Emissions for the Characterization of Non-Metallic Materials for Automobiles |
| VDI 3862: Blatt 3 Measurement of aliphatic and aromatic aldehydes and ketones by DNPH method |
| VdL-RL 03 Determination of the formaldehyde concentration in water-thinnable coating materials and polymer dispersions |
| VDMA 24364 Testing for paint wetting impairment substances (LABS conformity) |
| SAE J 1351 Hot Odor Test for Materials Used in Vehicle Interior Cabins |
| SAE J 1756 Determination of the Fogging Characteristics of Interior Automotive Materials |
| SAE J 2334 Laboratory Cyclic Corrosion Test |
| SAE J 2527 Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus |
| SAE J 2635 Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim |
| GMW3205 Determining the Resistance to Odor Propagation of Interior Materials |
| GMW3208 Rotary Abrasion Test, Taber Type |
| GMW3235 Fogging Characteristics of Trim Materials |
| GMW3286 Neutral Salt Spray (NSS) Test |
| GMW14124 Automotive Environmental Cycles |
| GMW14333 Fuel Resistance of Automotive Exterior Materials and Components |
| GMW14334 Chemical Resistance to Fluids |
| GMW14445 Sunscreen and Insect Repellant Resistance |
| GMW14458 Copper-Accelerated Acetic Acid Salt Spray (CASS) Test |
| GMW14650 Performance Requirements for Exterior Plastic Parts |
| GMW14665 Anodic Oxidation Coating on Aluminum |
| GMW14668 Minimun Performens Requirements for Decorative Chromium plated plastic parts |
| GMW14669 Organic Coating Performance for Exterior and Interior Metallic Components |
| GMW14674 Organic Coating for Cast Iron Parts |
| GMW14688 Determination of the scratch resistance of plastics (Method A) and the determination of the mar resistance of plastics (Method B) |
| GMW14698 Scratch Resistance of Organic Coatings and Self-adhesive Films |
| GMW14700 Stone Impact Resistance of Coatings |
| GMW14729 Procedures for High Humidity Test |
| GMW14799 Steering Wheel Diameter Measurement |
| GMW14829 Tape Adhesion Test for Paint Finishes |
| GMW14872 Cyclic Corrosion Laboratory Test |
| GMW14885 Painted Aluminum Road Wheels - Paint Performance Requirements |
| GMW15287 Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim |
| GMW15891 Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates |
| GMW16243 Decorative Exterior Decals - Foils |
| GMW16745 Water Jet Tests |
| GMW17138 Determination of Film Thickness |
| WSK-M2P159 Paint Performance, Aluminum Road Wheels |
| WSK-M3G178 Tape, Decorative, Pressure Sensitive, Exterior |
| WSK-M98P6 Finished Parts, Plastics, Exterior |
| WSS-M15J14 Paint, Two Component Color Coat for Plastic, Interior |
| WSS-M15J15 Paint, Two Component Color Coat for Plastic, Interior |
| WSS-M15P34 Part Performance, Hard Mold-In-Color Interior Components |
| WSS-M15P4 Assembly Performance, Hard Mold-In-Color Interior Components |
| WSS-M1P83 Decorative Chrome Electroplated Part Rerformance Requirements, ABS Or PC/ABS Substrates, General Exterior Use |
| WSS-M2P122 Paint Performance: Aluminum Wheels and Steel Wheels |
| WSS-M2P177 Paint Performance, Metal Substrates |
| WSS-M2P180 Paint Performance, Rigid Substrates, Exterior |
| WSS-M2P188 Paint Performance, Plastic Substrates, Interior |
| WSS-M2P190 Paint Performance, Visible/Non-Visible Interior Parts Metal Substrates |
| WSS-M4P13 Anodized Aluminum Performance |
| WSS-M5P8 Lighting Metalization, Plastic/Metal Substrates |
| WSS-M99P2222 Performance, Vehicle Interior Environment Quality Material / Component / Level Requirements |
| CETP 00.00-L-467 Laboratory Acclerated Cyclic Corrosion Test |
| FLTM AQ 110-01 Zink Phosphate Coverage Evaluation For Painted Steel Chassis Components |
| FLTM BI 103-01 Salt Spray Resistance Test for Painted Panels and Parts |
| FLTM BI 104-01 Water Immersion Test for Painted Parts and Panels |
| FLTM BI 106-01 Coating Adhesion Test |
| FLTM BI 109-01 Visual Appearance Evaluation |
| FLTM BI 110-01 Measurement of the Gloss of Paint Panels |
| FLTM BI 113-01 Water and Soap Spotting Test for Paint |
| FLTM BI 113-02 Resistance to Acid Spotting |
| FLTM BI 113-06 Test Method for Resistance to Perspiration |
| FLTM BI 113-08 Resistance to Sunscreen Lotion and Insect Repellent |
| FLTM BI 117-01 Thickness Measurement of Paint Films |
| FLTM BI 123-01 Painted Sheet Metal Corrosion Test |
| FLTM BI 123-03 Component Corrosion Test |
| FLTM BI 152-01 Resistange of Paint Films to Solvents |
| FLTM BI 157-06 High Performance Stone Chip Resistance Test New Rating Scale |
| FLTM BI 161-01 Mar Resistance Determination for Automotive Coatings |
| FLTM BI 168-01 Fluid Resistance of Chassis and Exterior Materials for Incidential Exposure |
| FLTM BN 103-01 Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking |
| FLTM BN 107-01 Crocking Test |
| FLTM BN 108-02 Resistance to Abrasion - Taber Abraser |
| FLTM BN 112-08 Soiling & Cleanability Test for Interior Trim Materials |
| FLTM BN 121-01 Bond Strength Test -Interior Trim Decorations |
| FLTM BN 151-01 Determation of 180 Degree Peel Adhesion Strength of Laminates |
| FLTM BN 155-01 Resistance to Simulated Finger Tip Abrasion |
| FLTM BO 101-05 Determination of Fuel Resistance of Plastic Parts |
| FLTM BO 131-03 Interior Odor Test |
| FLTM BO 151-01 Resistance to Low Temperature Impact |
| FLTM BO 160-04 Resistance of Painted Plastic Parts to High Pressure Cleaning Operations |
| FLTM BO 162-01 Resistance to Scratch and Marr |
| FLTM BZ 156-01 Determination of Formaldehyde, Aldehyde and Ketone Emissions |
| FLTM BZ 157-01 Determination of Organic Emissions by Headspace Gas Chromatography |
| TPJLR.52.002 Mar Resistance |
| TPJLR.52.058 Adhesive Bond Strength – 90 Degree and 180 Degree Peel Method |
| TPJLR.52.061 Paint Adhesion Test Method |
| TPJLR.52.153 Interior Painted Trim Resistance to Suncream |
| TPJLR.52.155 Fluid Spotting of Automotive Trim |
| TPJLR.52.156 Resistance of Interior Trim to Perspiration – Immersion Test |
| TPJLR.52.160 Resistance to Exterior Transit Protection Materials |
| TPJLR.52.210 CLEANABILITY TEST FOR INTERIOR TRIM Materials |
| TPJLR.52.252 Resistance to Neutral Salt Spray Corrosion Test |
| TPJLR.52.253 Test Cycle for Resistance to Humidity and Salt Spray |
| TPJLR.52.254 Calcium Chloride Accelerated Corrosion Test (Russian Mud Test) |
| TPJLR.52.265 Laboratory Accelerated Cyclic Corrosion Test |
| TPJLR.52.351 Resistance to Humidity - General |
| TPJLR.52.352 Resistance to Heat Ageing - General |
| TPJLR.52.353 Accelerated Environmental Ageing |
| TPJLR.52.456 Scrape Adhesion of Organic Coatings |
| TPJLR.52.458 Determination and Assessment of Odour from Interior Trim Materials, Components and Assemblies |
| TPJLR.52.554 Prohesion Corrosion Testing |
| TPJLR.52.561 Resistance Of Painted Exterior Parts To High Pressure Cleaning Operations |
| TPJLR.52.564 Water Immersion Test For Painted Parts And Panels |
| TPJLR.52.599 High Performance Stone Chip Resistance Test |
| TPJLR.52.656 Hydrolysis Test - Interior Painted Finishes |
| TPJLR.52.701 Determination of Crack Density of Microcracked or Pore Density of Micro-porous Chromium |
| AA-0026 Aging resistance test |
| AA-0053 Sun cream resistance of painted parts in the interior |
| AA-0055 Chemical resistance test of surfaces |
| AA-0061 Formaldehyde emission from non metallic materials and components, determined by HPLC |
| AA-0079 Determination of multi impact stone chip resistance |
| AA-0101 Reflectometer Value (Gloss) |
| AA-0129 Cass Testing ( Copper chloride-acetic acid salt spray testing) |
| AA-0134 Dry scratch resistance test using Crockmeter |
| AA-0136 Testing of Resistance to Pressure Water Jet (Steam Jet Test) |
| AA-0161 Color Measurement on Bodies and Hang On Parts |
| AA-0168 Filiform Corrosion on coated Aluminium |
| AA-0175 Galvanostatic Cathodic Polarization Corrosion Short-Term Test on Coated Steel |
| AA-0180 Cross hatch/cross-cut testing |
| AA-0203 Hydrolysis Test |
| AA-0213 Condensation Water Constant Atmosphere Test |
| AA-0224 Cyclic Corrosion Test |
| AA-0235 Accelerated weathering crack stability |
| AA-0236 Accelerated weathering colour stability |
| AA-0257 Measurement of structure and gloss on painted surfaces |
| AA-0264 Multi-stone chip test with salt water exposure |
| AA-0324 Saltspray - Test |
| AA-0326 SCAB corrosion test |
| AA-0340 Scalpel Cut on CFK-parts with Clearcoat |
| AA-0354 Technical Understanding of Color Measurement and the Measurement of Test Panels for Initial and Batch Release |
| AA-0403 Visual Color Comparison and Metamerism Test/coated test panels |
| AA-0471 Abrasion Resistance using the Abrex Test Equipment |
| GS 90011 Coating of parts made of metallic materials by means of organic materials |
| GS 93008-1 Substances of concern; Materials and components;Prohibited and declarable substances |
| GS 93008-4 Substances of concern; Emissions from materials and components |
| GS 93036 Light Weight Reinforced Thermoplast in the exterior |
| GS 94007 Painted plastic parts |
| GS 94015 Topcoats and painted parts for motorcycles |
| GS 97014-3 Emissions measurement with air exchange in a testing chamber - Determination of volatile, organic emissions from components, semi-finished products and materials |
| GS 97014-4 Emissions measurement with air exchange in a testingchamber: Determination of the olfactory behavior |
| GS 97017 Coatings on plastic parts - Electroplated plastic parts |
| GS 97034-1 Manual abrasion test |
| GS 97034-2 Fingernageltest |
| GS 97034-3 Shoe sole test |
| GS 97034-4 Color abrasion behavior |
| GS 97034-5 Resistance to cleaning and maintenance agents |
| GS 97034-6 Soiling behavior and cleaning ability |
| GS 97034-8 Determination of the scratch inclination |
| GS 97034-9 Scratch test |
| GS 97034-10 Scratch and abrasion resistance |
| GS 97034-12 Resistance against interior cleaners |
| GS 97102 PVD coatings on stainless steel surfaces and chromed surfaces |
| GS 97121-1 Inorganic surface coatings - Anodized aluminum parts for motorbikes |
| GS 97121-2 Inorganic surface coatings - Electroplated chrome coatings on motorbikes |
| PR 231 Seal system doors and lids |
| PR 292 Underbody Attachment |
| PR 303.6 Climate change test for equipment parts |
| PR 11737497 Seal system doors and lids |
| PR 11737558 Underbody Attachment |
| PR 11737567 Climate change test for equipment parts |
| QV 11738863 Test of surface condition of wheels |
| M 3018 Corrosion protection and coating systems for purchased parts, Truck and Bus |
| M 3022 Coating materials for components made of plastics |
| M 3082 Anti-corrosion waxes |
| M 3166 Powder Coating |
| M 3497 Coated and printed plastic components in the vehicle interior |
| MAN 272 Corrosion protection of steel containers and pipe fittings in the compressed air system |
| MAN 277 Adhesion test (Scratch Test) |
| DBL 3391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 7390 Primed metallic components as basis for the following finish coats |
| DBL 7397 Condensation-Water-Resistant Coating |
| MBN 61997 Modification to ISO 11997-3:2022-07: Execution, monitoring and documentation of corrosion tests |
| DBL 1000 Emissions and Odor in the Vehicle Interior |
| DBL 1111 Body parts made from press-hardened sheet steel |
| DBL 1172 Extruded AlMgSi Sections for Body Parts |
| DBL 1224 Requirements for Thermoplastic Synthetic Materials for Applications in the Interior |
| DBL 1232 Thermoplastics for Exterior Applications |
| DBL 1233 Long-fiber reinforced thermoplastics in the exterior, underbody and body |
| DBL 1262 Components Manufactured from Thermoplastic Elastomers |
| DBL 1287 Elastomer Materials for Components in Vehicles |
| DBL 1300 Coating / Paintwork of Plastic Parts in the Vehicle Exterior |
| DBL 1301 Scratch-resistant coatings of plastic parts on vehicle exteriors and coatings on plastic parts for headlamps |
| DBL 1302 Coating of Plastic Parts in Vehicle Interiors |
| DBL 1303 Decorative Coating of Plastic Parts using Plasma or Vacuum Deposition |
| DBL 1304 Decorative coating of metallic interior component parts with plasma or vacuum deposition (PVD) |
| DBL 1326 Nonwoven Fleece |
| DBL 1504 Volatile Corrosion Inhibition (VCI) Products |
| DBL 1551 Organic Coating for Metallic Parts on the Outer Side and Underside of the Vehicle and in the Engine Compartment |
| DBL 1630 Self-Adhesive Labels |
| DBL 1650 Parts Manufactured from Ferrous Materials with Inorganic Coating (Zinc Flake Coatings) |
| DBL 1651 Electrodeposited Zinc and Zinc Alloy Coatings for Components Manufactured from Ferrous Materials |
| DBL 1657 Anti-corrosion coatings for single-wall welded carbon steel tubing parts |
| DBL 1659 Electroplated metal parts with nickel, nickel-chromium or copper-nickel-chromium coatings |
| DBL 1665 Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings |
| DBL 1666 Galvanic single-part and drum coating of components for body shell applications, which are then given a KTL and/or top coat coating |
| DBL 1740 Fasteners with Metric Threads, Surface Protection and Supplementary Technical Delivery Conditions |
| DBL 1750 Aluminum Parts with Anodic Oxide Layers |
| DBL 1752 Decorative and Functional Composite Material Systems in the Interior |
| DBL 3390 Primed metallic components as basis for the following finish coats |
| DBL 3391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 5307 Flame retardant properties – Interior trim parts– Requirements and test specifications |
| DBL 5404 Parts Manufactured from Thermoplastics for the Direct and Indirect Areas of the Passenger Compartment and for Passenger Compartment Heating and Ventilation, Trim and Housings |
| DBL 5410 Parts made of thermoplastic materials for control devices, bearing and fastening elements, spacers |
| DBL 5416 Parts manufactured from Thermoplastics for Paneling, Housings and Functional Parts for External Applications |
| DBL 5417 Molded Parts Manufactured from Long-Fiber-Reinforced Thermoplastics, Hot Pressed |
| DBL 5418 Injection Molded Parts Manufactured from Fiber Reinforced Thermoplastics for Structural Requirements |
| DBL 5425 Coating / Paintwork of Plastic Parts in the Vehicle Exterior |
| DBL 5428 Scratch-resistant coatings of plastic parts on vehicle exteriors and coatings on plastic parts for headlamps |
| DBL 5430 Emissions and Odor in the Vehicle Interior |
| DBL 5471 Trim and moulded upholstery parts for vehicle interiors (composite components) |
| DBL 5490 Supply Specification: Plastic Components Manufactured from Recycled Materials |
| DBL 5562 Components Manufactured from Thermoplastic Elastomers |
| DBL 5587 Elastomer Materials for Components in Vehicles |
| DBL 5869 Supply Specification: Nonwoven fleece |
| DBL 6994 Volatile Corrosion Inhibition (VCI) Products |
| DBL 7381 Organic Coating for Metallic Parts on the Outer Side and Underside of the Vehicle and in the Engine Compartment |
| DBL 7382 Supply specification Coating/Painting of Metallic Parts in Vehicle interior |
| DBL 7384 Coating of Plastic Parts in Vehicle Interiors |
| DBL 7391 Organic coating for metallic parts on the outside of vehicles in commercial vehicles |
| DBL 7402 Decorative Coating of Plastic Parts using Plasma or Vacuum Deposition |
| DBL 7403 Decorative coating of metallic interior component parts with plasma or vacuum deposition (PVD) |
| DBL 8230 Self-Adhesive Labels |
| DBL 8427 Anti-corrosion coatings for single-wall welded carbon steel tubing parts |
| DBL 8440 Parts Manufactured from Ferrous Materials with Inorganic Coating (Zinc Flake Coatings) |
| DBL 8451 Electrodeposited Zinc and Zinc Alloy Coatings for Components Manufactured from Ferrous Materials |
| DBL 8459 Electroplated metal parts with nickel, nickel-chromium or copper-nickel-chromium coatings |
| DBL 8465 Electroplated Parts Manufactured from Plastics with Metallic and Additional Coatings |
| DBL 9202 Decorative and Functional Composite Material Systems in the Interior |
| DBL 9440 Fasteners with Metric Threads, Surface Protection and Supplementary Technical Delivery Conditions |
| MBN 10473-1 Measurement of Colors |
| MBN 10473-2 Technical Data for Color Measurement |
| MBN 10476 Visual Color Assessment of Painted Bodies, Add-On Parts and Metal Sheets in the Exterior |
| MBN 10494-1 Paint Test Methods – Part 1: General Requirements |
| MBN 10494-2 Paint Test Methods – Part 2: Testing of Paints in Wet Condition |
| MBN 10494-3 Paint Test Methods – Part 3: Processing Tests |
| MBN 10494-4 Paint Test Methods – Part 4: Optical Tests |
| MBN 10494-5 Paint Test Methods – Part 5: Technical-Mechanical Tests |
| MBN 10494-6 Paint Test Methods – Part 6: Climatic Tests |
| MBN 10494-7 Paint Test Methods – Part 7: Resistance to Chemicals, Test Mixtures and Test Concentrates |
| MBN 10494-8 Paint Test Methods – Part 8: Adhesion of Adhesives on the Coating |
| MBN 10494-9 Paint Test Methods – Part 9: Special Test Methods for Electrodeposition Coats in Wet Condition |
| MBN 10494-10 Paint Test Methods – Part 10: Special Test Methods for Electrodeposition Coats in Dry Condition |
| MBN 10514-2 Appearance - Part 2: Measurement methods for painted surfaces |
| MBN 10518 Test Specifications for Ensuring the Adhesion of Assembly Bonds |
| MBN 10526 Test Methods for Self-Adhesive Components |
| MBN 50306 Electric and Electronic Components in Motor Vehicles – Environmental Requirements and Tests |
| MBN 50473 Measurement of Colors |
| MBN 50476 Visual Color Assessment of Painted Bodies, Add-On Parts and Metal Sheets in the Exterior |
| MBN 50494-5 Paint Test Methods – Part 5: Technical-Mechanical Tests |
| MBN 50494-6 Paint Test Methods – Part 6: Climatic Tests |
| MBN 50494-8 Paint Test Methods – Part 8: Adhesion of Adhesives on the Coating |
| MBN 50526 Test Methods for Self-Adhesive Components |
| MBN 51000-2 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 2: Approval processes |
| MBN 51000-3 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 3: Other Tests |
| MBN 51000-4 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 4: Thermal Tests |
| MBN 51000-6 Polymer-based Materials, Material Systems, and Semi-finished Products, Part 6: Mechanical Tests |
| MBN LV124-2 Electric and Electronic Components in Motor Vehicles – Environmental Requirements and Tests |
| 37-00-081 Passenger compartment - Material and Part Emissions |
| 47-01-002 Electroplating decorative Coating - Chrome Plating on Plastic Parts |
| 47-03-005 Paint Coatings and Foils by Dipping for Internal Plastic Parts |
| D15 1343 Coloured Materials Visual Comparison of Colours In Light Chamber |
| D17 2028 Corrosion Test by automatic Change of Phases of Salt Spray, Drying and Humidity (Ecc1) |
| D24 1702 Paints Resistence to Gritting by Shot Blasting |
| D25 1413 Paint Coatings, Plastics and Rubbers Gloss Measurement |
| D27 1911 Rubber and Plastic Paint Coatings artificial ageing Using Weatherometer |
| D40 3004 Analysis of Formaldehyde and other Carbonyl compouds in the equipment of vehicle passanger compartment by Liquid Chromatography |
| D40 3004 Analysis of Formaldehyde and other Carbonyl compounds |
| D41 1126 Resistance to tearing |
| D42 1775 Interior and Exterior Plastic Parts Resistance to Scoring by abrasion |
| D42 2036 External painted parts – Scratch resistance by abrasion |
| D42 3109 Passenger compartment; Evaluation of the VOC Quantity by thermal Desorption/GC/MS |
| D44 1900 Plastics - Resistance to Marking (Resistance to Scoring Through Polishing) |
| D45 1727 Interior Trim Materials and passanger compartment parts, FOGGING |
| D45 1837 Paint coating on plastic parts and mass staining of colored materials by automotive fluids |
| D47 1165 Accelerated aging |
| D47 1309 Ageing accord. to given climatic cycles |
| D49 3001 Odour Emissions, Intensity Evaluation and global Odour Characterisation |
| D51 3022 Right-angle peeling |
| BSDM0500 Flammability test method for interior materials |
| BSDM0503 Fogging test method for non-metallic materials |
| BSDM0505 Smell qualitiy of non- metallic materials |
| TSM0503G Fogging test method for non-metallic materials |
| TSM0505G Smell qualitiy of non- metallic materials |
| TSH3131G Paint film quality of coated exterior parts |
| TSH 3122G Coating quality for aluminum wheel disk |
| TSM5743G Polypropylene foam materials for the spacer of luggage room |
| TSH1503G Grid test |
| TSH1505G Determination of water resistance in accordance |
| TSH1552G Determination of resistance to salt spray |
| TSH1555G Determination of resistance to corrosion of damper contact area |
| TSH1511G Thermal cyclic test |
| TSH1503G Heat resistance |
| STD 1024,2844 Peel adhesion (180°) |
| STD 1024,7134 Abrasion-Organic materials |
| STD 1024,7135 Abrasion resistance- Abrasion resistant coatings |
| STD 1026,1122 Heat resistance -Plastic |
| STD 1026,5172 Determination of colour in colour-matching booth |
| STD 1026,8177 Chemical resistance - Surface treatments |
| STD 1026,8201 Grey scale - Determination of changes in colour |
| STD 1026,8202 Grey scale for assessing staining |
| STD 1026,8432 Colour fastness to rubbing - Rubber, plastics and textiles |
| STD 1026,8433 Colour fastness to rubbing with organic solvents -textiles |
| STD 1026,8434 Colour fastness to rubbing- paint and enamels |
| STD 1027,3375 Moisture resistance in tropical cabinet |
| STD 1027,6132 Test liquids |
| STD 1029,5471 Adhesion, water spraying under high pressure Paints and enamels |
| STD 1029,5472 Adhesion, cross-cut test Paints and enamel |
| STD 1029,5473 Adhesion -Paints and enamels |
| STD 121-0001 Painting Y 600 |
| STD 121-0002 Painting Y 650 |
| STD 1266,1 Decals 96610 -Self-adhesive, permanent application |
| STD 420-0003 Fogging organic materials |
| STD 423-0009 Adhesion -Paints and enamels, knife technique |
| STD 423-0012 Adhesion, cross-cut test- Paints and enamels |
| STD 423-0014 Accelerated Corrosion Test |
| STD 423-0015 Adhesion, water spraying under high pressure Paints and enamels |
| STD 423-0018 Moisture resistance in tropical cabinet Chemical materials |
| STD 423-0024 Extensibility- paints and panels |
| STD 423-0030 Scratch resistance, Erichsen Pen- Organic materials |
| STD 423-0037 Colour fastness to rubbing-Rubber, plastics, textiles, paints and varnishes |
| STD 423-0069 Accelerated corrosion test, version II (ACT II) |
| STD 429-0001 Odour of trim materials in vehicles-organic materials |
| STD 429-0002 Formaldehyde emission |
| STD 429-0003 Determination of organic emissions |
| STD 5751,5 Painting Y 500 - Metal substrates |
| STD 5751,55 Painting Y 550- Plastics substrates |
| VCS 1024,11419 Extensibility |
| VCS 1024,31139 Erichsen Pen |
| VCS 1024,31239 Hardness |
| VCS 1024,71349 Abrasion |
| VCS 1025,89 Determination of film thickness |
| VCS 1026,51729 Assessment of colour in light booth |
| VCS 1026,52729 Gloss |
| VCS 1026,52749 Paint surface texture |
| VCS 1026,81779 Chemical resistance |
| VCS 1026,81819 Chemical resistance under heat influence |
| VCS 1026,84349 Colour fastness to rubbing |
| VCS 1027, 2739 Formaldehyde emission |
| VCS 1027,13729 Accelerated outdoor exposure |
| VCS 1027,1449 Accelerated corrosion test, version II – ACT II |
| VCS 1027,149 Accelerated corrosion test |
| VCS 1027,2719 Fogging organic materials |
| VCS 1027,2729 Odour of trim materials in VEHICLE |
| VCS 1027,2749 Determination of organic emissions |
| VCS 1027,33759 Moisture resistance in tropical cabinet |
| VCS 1027,339 Accelerated light exposure of exterior coatings |
| VCS 1029,54719 Adhesion, water spraying under high-pressure |
| VCS 1029,54729 Adhesion, cross-cut test |
| VCS 1029,54739 Adhesion |
| VCS 5031,19 Flammability of interior materials |
| VCS 5737,19 Cathodically protective surface treatment with friction requirement Y100 |
| VCS 5751,5119 Paint refinishing system |
| VCS 5751,59 Paint systems |
| PV 3.3.2 Paints and Varnishes; Light Transmittance Measurements on Paint Materials to Determine the Binding Minimum Coating Thickness |
| PV 3.10.7 Testing for Substances That Impair Paint Wetting Ability |
| PV 3.14.7 Test of Stone-Chip Resistance according to DIN EN ISO 20567-1 |
| PV 4.10.4 Strength Testing of Paintwork Structure. Tensile Shear Test of Adhesive Joints on Painted Sheet Metal |
| PV 12.35 Testing of Tensile Shear Strength |
| PV 1015 Bimetallic Corrosion Caused by Elastomers and Plastics Connected to Light Metals - Specific Volume Resistance Testing |
| PV 1058 Determination of the Micro-Crack Pattern on Chrome-Plated Surfaces |
| PV 1063 Determining the Micropore Density |
| PV 1065 Determining Differences of Potential and Layer Thicknesses of Nickel Coatings |
| PV 1073 Corrosion Resistance of Chrome Surfaces |
| PV 1200 Testing the Environmental Cycle Resistance (80 °C/-40 °C) |
| PV 1207 Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1208 Corrosion Test (SWAAT) |
| PV 1209 Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1210 Corrosion Test (Body and Add-On Parts/Hang-On Parts) |
| PV 1300 PVC and PVC copolymer; thermal stability test |
| PV 1303 Xenon Arc Light Aging of Vehicle Interior Parts |
| PV 1306 Exposure Test for Determining the Tackiness of Polypropylene Parts |
| PV 1401 Lubricating Oils - Testing of Corrosion Protection Behavior |
| PV 1503 Pressure Washer Test |
| PV 2005 Environmental Cycle Resistance Testing of Special Parts, Neww Developments, and Solutions |
| PV 2034 Non-Metalic Planar Materials; Floating Roller Peel Test |
| PV 3015 Fogging Behavior of Materials Used in the Vehicle Interior, Gravimetric Determination of Condensable Components |
| PV 3307 Elastomer Components; Plastic and Elastic Deformability |
| PV 3330 Elastomer O-rings; Compression Set (Plastic Deformation) |
| PV 3341 Determination of Emission of Organic Compounds |
| PV 3356 Testing of the Soiling and Cleaning Behavior |
| PV 3357 Sound Insulation Materials; Behavior on Flame Exposure with a Burner; Surface and Edge Flame Exposure Test |
| PV 3381 Determination of Bending Stiffness of Textile, Flat semi-finished products for Material characterization |
| PV 3900 Odor Test |
| PV 3903 Measurement of Bending Stiffness |
| PV 3905 Organic Materials; Ball Drop Test |
| PV 3906 Testing the Abrasion Behavior |
| PV 3919 Nonwoven Fabric Sound Insulation; Determining Compression Stress |
| PV 3922 Planar Fabrics and Molded Parts; Oil- and Water-Repellent Behavior |
| PV 3925 Polymer Materials; Determination of Formaldehyde Emission; Measurement by a Modified Bottle Method |
| PV 3929 Weathering in Dry, Hot Climate |
| PV 3930 Weathering in Humid, Hot Climate |
| PV 3936 Polymer Materials; Testing the Resistance to Constituents of Blowby Gases |
| PV 3942 Emission Behavior of Parts, Components, and Semi-Finished Products for the Vehicle Interior; Testing Using the DUT Chamber Method |
| PV 3952 Determination of the Scratch Resistance of Surfaces without Finish Treatment in Vehicle Interiors and Exteriors |
| PV 3954 Determination of Bending Stiffness |
| PV 3961 Trim Cover Material; Hook Fastener Test |
| PV 3962 Coated Metal Gaskets; Determination of Scratch Resistance |
| PV 3964 Testing of Cream Resistance |
| PV 3965 Visual Color Matching according to DIN EN ISO 3668 |
| PV 3966 Stress Whitening Properties (Ball Drop Test) |
| PV 3968 Soiling behavior |
| PV 3974 Determination of the Mar Resistance of Surfaces without Finish Treatment in Vehicle Interiors And Exteriors |
| PV 3983 Testing Resistance to Agents in Conjunction with Mechanical Stresses |
| PV 3987 Scrub Resistance (Micro-Scratch Resistance) of High-Gloss Surfaces in the Vehicle Interior |
| PV 3989 Low-Temperature Behavior of Plastic Components; Ball Drop Test |
| PV 3991 Structured Surfaces; Skin Abrasion Testing |
| PV 7201 Testing of Filiform Corrosion Properties |
| PV 8610 INKA test (Ingolstadt Corrosion and Aging Test); testing of components |
| TL 152 Powder Paint for Cylinder Block and Crankcase |
| TL 182 Duplex Coating on Aluminum Parts |
| TL 187 Nitrocarburized and Coated Ball Studs |
| TL 191 Paint Finish of Exhaust System Parts |
| TL 196 Duplex Coating Systems for Small Parts and Bulk Parts |
| TL 203 Decorative Chrome Plating (Ni-Cr Coatings) on Metal Components |
| TL 207 Reflective Coatings on Enclosed Plastic Reflectors and Coatings in the Interior of Light Units |
| TL 211 Coating of Plastic Exterior Parts |
| TL 212 Oxide Coatings on Aluminum Parts |
| TL 214 Coating with Zinc-Dust Paint |
| TL 216 Corrosion Protection on Half Shafts |
| TL 217 Zinc Coatings |
| TL 218 Body Color Multi-Layer Paint on Metallic Body Skin Parts |
| TL 222 Corrosion Protection Coatings for Brake Pipes |
| TL 226 Paintwork on Materials of Vehicle Interior Equipment |
| TL 227 Single-Layer Paint Coating of Zinc-Coated Metal Surfaces |
| TL 233 Non-Electrolytically Applied Zinc Flake Coatings with an Organic Top Coat |
| TL 238 Surface Protection, Steel Rims |
| TL 239 Surface Protection, Alloy Wheel |
| TL 244 Zinc/Nickel Alloy Coatings |
| TL 245 Non-Electrolytically Applied Zinc Flake Coatings |
| TL 256 Powder Coating on Metal Surfaces |
| TL 260 Paintwork of Metal Surfaces |
| TL 262 Paint Finish of Chassis Parts |
| TL 526 Plasticized PVC, Weather-Resistant |
| TL 527 ABS Graft Polymer, Finished Parts |
| TL 528 Chrome-Plated Plastic Parts |
| TL 529 Hydrolysis-Resistant Finished Parts Made of Thermoplastic Polyurethane |
| TL 591 Organic Glass for Light Units |
| TL 874 Radiator |
| TL 1010 Materials for Interior Equipment; Flammability Requirements |
| TL 1011 Flammability of Non-Metallic Materials |
| TL 52018 Double-Sided Foam Adhesive Tape |
| TL 52038 Adhesive Labels |
| TL 52065 Elastomer Sealing Material Made of Cellular Rubber |
| TL 52231 ABS and PC Polymer Blends |
| TL 52288 Polyamide, Mineral-Reinforced, Finished Parts |
| TL 52310 Microfiber Seat Cover Material and Decorative Material |
| TL 52311 ASA for Components in the Vehicle Exterior Area |
| TL 52388 Polypropylene for Use in the Vehicle Interior |
| TL 52437 Plastic Outer Lenses with Protective Coating |
| TL 52451 Paintwork of Decorative Metallic Add-on Parts on the Exterior |
| TL 52452 Polypropylene with Increased Crystallization |
| TL 52476 POM, Finished Parts for the Vehicle Interior |
| TL 52486 AEM for Charge Air Hoses |
| TL 52499 Linings made of thermoplastic bonded mixed fiber molding material |
| TL 52622 Thermoplastic Elastomers in Hard/Soft Compounds for the Exterior Area |
| TL 52625 Plastic Front-End Carrier |
| TL 52629 Decorative Materials for Luggage Compartment and Load Compartment |
| TL 52631 Visible Trim Parts for the Vehicle Exterior Made of PP Compounds |
| TL 52693 TPE Floor Mat |
| TL 52649 Wheel Housing Liner; Commercial Vehicle Wheel Housing |
| TL 52660 Underbody Applications; Engine/Motor Encapsulation, Stone Guard, cd-Enhancing Panels in Thermoplastic Design |
| TL 52662 Molded Parts Made of Needle-Punched Nonwoven |
| TL 52671 Hochglanzkunststoffe (außer ASA) im Exterieurbereich |
| TL 52678 NR for Wiper Blades |
| TL 52680 Components Made of Long-Fiber-Reinforced or Continuous-Filament-Reinforced Plastic Composites (FRP) |
| TL 52688 Polypropylene for Battery Boxes |
| TL 52704 Static Body Seals and Molded Corners Made of EPDM |
| TL 52711 Underbody Applications – Engine Encapsulations, Transmission Encapsulations, and cd-Enhancing Underbody Panels Made of LWRT |
| TL 52726 Plastic High-Gloss Applications in the Exterior Area |
| TL 52742 Wheel Trim Add-on Parts |
| TL 82086 Refrigerant Heat Exchanger |
| TL 82132 Charge Air Coolers |
| TL 82316 R134a/R1234yf Refrigerant Lines |
| TL 82406 Heater Cores |
| TL 82436 Hood Hinge - Single-Joint and Multiple-Joint |
| TL 82448 Brake Pipe - Flare Load Capacity, Reverse Bend Test |
| VW 2.8.1 Elastomers; Materials Requirements and Testing |
| VW 13750 Surface Protection for Metal Parts |
| VW 44045 Polypropylene, Finished Parts |
| VW 50002 Test Agents - Materials Compatibility |
| VW 50123 Thermoplastic Elastomers |
| VW 50125 Polyamide 6 for Finished Parts in the Vehicle Interior |
| VW 50133 PA66 for Finished Parts Outside the Vehicle Interior |
| VW 50134 PA6 for Finished Parts Outside the Vehicle Interior |
| VW 50136 PBT for Finished Parts Outside the Vehicle Interior |
| VW 50164 Methods for Testing and Releasing VCI Packaging Materials |
| VW 50180 Emission Behavior |
| VW 50185 Resistance to Open-Air Weathering of the Whole Vehicle and of Parts |
| VW 50190 Colorimetric Evaluation of Exterior Automotive Paint Finishes |
| VW 50194 Definition of Tolerances and Evaluation of the Differences in the Sparkling and Graininess of Effect Paints |
| VW 50195 Colorimetric Evaluation of Exterior Automotive Paint Finishes |
| VW 50196 Decorative Exterior Parts in Non-Body Color |
| VW 51500-1 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 1: Modified Climate Change Test |
| VW 51500-2 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 2: Corrosion Protection Requirements as per Modified Environmental Cycle Test |
| VW 51500-3 Corrosion Testing of Parts or Assemblies with a Composite Construction - Part 3: Corrosion Classes, Zone Classification, and Evaluation |
| VW 51780 Emission behavior |
| VW 80000 Electric and Electronic Components in Motor Vehicles up to 3.5 t |
| VW 96135 Interior / Exterior - Surface Decors ; Plastic Components with Electrolytically Deposited Metal Surfaces |
| VW 96136 Exterior; Decorative Foil / Protective Foil / Decorative Foil with Protective Function. |
| VW 96183 Interior ; Surface Decors - Painting/ Pad Printing/ Hot Stamping |
| VW 96197 Adhesive films and tapes for vehicle interiors and exteriors |
| VW 96232 Tufting Carpet for Floor Covering, Textile Covers, and Mats |
| VW 96238 Interior; Parts and Their Surfaces; Requirements and Tests |
| VW 96379 Climatic Test |
| VW 96380 Modified Environmental Cycle Test |
| VW 96383 Limiting Surface Flaws - Vehicle Interior |
| VW 96408 Adhesive and Sealing Materials; Peel Test |
| VW 96453 Absorbent Material made of Fiber Nonwoven for the Interior |
| VW 96457 Paintwork on Plastic Exterior Parts and Fiber-Reinforced Plastics |
| LAH.000.825.A Underbody textile LWRT |
| DBS 918015 Cleaning and care products for rail vehicles |
| DBS 918016 Graffiti remover for rail vehicles |
| DBS 918020 Self-adhesive films for outdoor labelling and advertising on rail vehicles |
| DBS 918021 Self-adhesive films for interior labelling on rail vehicles |
| DBS 918300 Coating materials for rail vehicles |
| DBS 918340 Powder coatings for rail vehicles |
| TL 8010-0001 Primers for Bundeswehr equipment |
| TL 8010-0002 Top coating materials for Bundeswehr equipment |
| STANAG 4360 / AEP-64 Paint systems for the resistance against corrosion, chemical agents and decontaminants |
| AECTP 300 Climatic environmental tests |
| MIL-STD-810 Environmental engineering considerations and laboratory tests |
