| PV 3.3.2 | "Paints and Varnishes; Light Transmittance Measurements on Paint Materials to Determine the Binding Minimum Coating Thickness " |
| PV 3.10.7 | Testing for Substances That Impair Paint Wetting Ability |
| PV 3.14.7 | Test of Stone-Chip Resistance according to DIN EN ISO 20567-1 |
| PV 4.10.4 | Strength Testing of Paintwork Structure; Tensile Shear Test of Adhesive Joints on Painted Sheet Metal |
| PV 12.35 | Testing of Tensile Shear Strength |
| PV 1015 | Bimetallic Corrosion Caused by Elastomers and Plastics Connected to Light Metals |
| PV 1058 | Determination of the Micro-Crack Pattern on Chrome-Plated Surfaces |
| PV 1063 | Determining the Micropore Density |
| PV 1065 | Determination of Potential Differences and Layer Thicknesses of Nickel Coatings |
| PV 1073 | Corrosion Resistance of Chrome Surfaces |
| PV 1200 | Testing the Environmental Cycle Resistance (80 °C/-40 °C) |
| PV 1207 | Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1208 | Corrosion Test (SWAAT) |
| PV 1209 | Corrosion Test (Environmental Corrosion Cycle Test) |
| PV 1210 | Corrosion Test (Body and Add-On Parts/Hang-On Parts) |
| PV 1300 | PVC and PVC copolymer; thermal stability test |
| PV 1303 | Xenon Arc Light Aging of Vehicle Interior Parts |
| PV 1306 | Exposure Test for Determining the Tackiness of Polypropylene Parts |
| PV 1401 | Testing of Corrosion Protection Behavior (Lubricating Oils) |
| PV 1503 | Pressure Washer Test |
| PV 2005 | Environmental Cycle Resistance Testing |
| PV 2034 | Floating Roller Peel Test |
| PV 3015 | Fogging Behavior, Gravimetric Determination of Condensable Components |
| PV 3307 | Elastomer Components; Plastic and Elastic Deformability |
| PV 3330 | Elastomer O-rings; Compression Set (Plastic Deformation) |
| PV 3341 | Determination of Emission of Organic Compounds |
| PV 3356 | Testing of the Soiling and Cleaning Behavior |
| PV 3357 | Behavior on Flame Exposure with a Burner; Surface and Edge Flame Exposure Test |
| PV 3381 | Determination of Bending Stiffness |
| PV 3900 | Odor Test |
| PV 3903 | Measurement of Bending Stiffness |
| PV 3905 | Ball Drop Test |
| PV 3906 | Testing the Abrasion Behavior |
| PV 3919 | Nonwoven Fabric Sound Insulation; Determining Compression Stress |
| PV 3922 | Planar Fabrics and Molded Parts; Oil- and Water-Repellent Behavior |
| PV 3925 | Determination of Formaldehyde Emission |
| PV 3929 | Weathering in Dry, Hot Climate |
| PV 3930 | Weathering in Humid, Hot Climate |
| PV 3936 | Polymer Materials; Testing the Resistance to Constituents of Blowby Gases |
| PV 3942 | Emission Behavior, Testing Using the DUT Chamber Method |
| PV 3952 | Scratch Resistance Test |
| PV 3954 | Determination of Bending Stiffness |
| PV 3961 | Trim Cover Material; Hook Fastener Test |
| PV 3962 | Coated Metal Gaskets; Determination of Scratch Resistance |
| PV 3964 | Testing of Cream Resistance |
| PV 3965 | Visual Color Matching according to DIN EN ISO 3668 |
| PV 3966 | Stress Whitening Properties (Ball Drop Test) |
| PV 3968 | Soiling behavior |
| PV 3973 | Tensile Test on Elastomer Sealing Rings |
| PV 3974 | Visual Color Matching according to DIN EN ISO 3668 Vehicle Interiors And Exteriors |
| PV 3983 | Testing Resistance to Agents in Conjunction with Mechanical Stresses |
| PV 3987 | Scrub Resistance (Micro-Scratch Resistance) of High-Gloss Surfaces in the Vehicle Interior |
| PV 3989 | Low-Temperature Behavior of Plastic Components; Ball Drop Test |
| PV 3991 | Skin Abrasion Testing |
| PV 7201 | Filiform Corrosion |
| PV 8610 | INKA test (Ingolstadt Corrosion and Aging Test); testing of components |
| TL 152 | Powder Paint for Cylinder Block and Crankcase |
| TL 161 | Paintwork on Plastic Exterior Parts ; Requirements and Tests of Porsche AG |
| TL 182 | Duplex Coating on Aluminum Parts |
| TL 187 | Nitrocarburized and Coated Ball Studs |
| TL 191 | Paint Coating on Rear Muffler |
| TL 196 | Duplex Coating Systems for Small Parts and Bulk Parts |
| TL 203 | Decorative Chrome Plating (Ni-Cr Coatings) on Metal Components |
| TL 207 | Reflective Coatings on Enclosed Plastic Reflectors and Coatings in the Interior of Light Units |
| TL 211 | Coating of Plastic Exterior Parts |
| TL 212 | Oxide Coatings on Aluminum Parts |
| TL 214 | Coating with Zinc-Dust Paint |
| TL 216 | Corrosion Protection on Half Shafts |
| TL 217 | Zinc Coatings |
| TL 218 | Body Color Multi-Layer Paint on Metallic Body Skin Parts |
| TL 222 | Corrosion Protection Coatings for Brake Lines |
| TL 226 | Paintwork on Materials of Vehicle Interior Equipment |
| TL 227 | Single-Layer Paint Coating of Zinc-Coated Metal Surfaces |
| TL 233 | Non-Electrolytically Applied Zinc Flake Coatings with an Organic Top Coat |
| TL 238 | Surface Protection, Steel Rims |
| TL 239 | Surface Protection, Alloy Wheel |
| TL 244 | Zinc/Nickel Alloy Coatings |
| TL 245 | Non-Electrolytically Applied Zinc Flake Coatings |
| TL 256 | Zinc/Nickel Alloy Coatings |
| TL 260 | Paintwork of Metal Surfaces |
| TL 262 | Paint Finish of Chassis Parts |
| TL 526 | Plasticized PVC, Weather-Resistant |
| TL 527 | ABS Graft Polymer, Finished Parts |
| TL 528 | Chrome-Plated Plastic Parts |
| TL 529 | Hydrolysis-Resistant Finished Parts Made of Thermoplastic Polyurethane |
| TL 591 | Organic Glass for Light Units |
| TL 874 | Radiator |
| TL 1010 | Materials for Vehicle Interiors; Burning Behavior |
| TL 1011 | Flammability of Non-Metallic Materials |
| TL 52018 | Double-Sided Foam Adhesive Tape |
| TL 52038 | Adhesive Labels |
| TL 52065 | Elastomer Sealing Material Made of Cellular Rubber |
| TL 52231 | ABS and PC Polymer Blends |
| TL 52288 | Polyamide, Mineral-Reinforced, Finished Parts |
| TL 52310 | Microfiber Seat Cover Material and Decorative Material |
| TL 52311 | ASA for Components in the Vehicle Exterior Area |
| TL 52388 | Polypropylene for Use in the Vehicle Interior |
| TL 52437 | Polycarbonate Headlamp Outer Lenses with Functional Coating |
| TL 52451 | Paintwork of Decorative Metallic Add-on Parts on the Exterior |
| TL 52452 | Polypropylene with Increased Crystallization |
| TL 52476 | POM, Finished Parts for the Vehicle Interior |
| TL 52486 | AEM for Charge Air Hoses |
| TL 52499 | Linings made of thermoplastic bonded mixed fiber molding material |
| TL 52622 | Thermoplastic Elastomers in Hard/Soft Compounds for the Exterior Area |
| TL 52625 | Plastic Front-End Carrier |
| TL 52629 | Decorative Material for Trunk and Load Compartment |
| TL 52631 | Bumper Covers, Bumper Spoilers, and Diffusers |
| TL 52649 | Wheel Housing Liner; Commercial Vehicle Wheel Housing |
| TL 52660 | Underbody Applications |
| TL 52662 | Molded Parts Made of Needle-Punched Nonwoven |
| TL 52671 | PMMA, High Gloss Trims for the Exterior |
| TL 52678 | NR for Wiper Blades |
| TL 52680 | Components Made of Long-Fiber-Reinforced or Continuous-Filament-Reinforced Plastic Composites (FRP) |
| TL 52688 | Polypropylene for Battery Boxes |
| TL 52693 | TPE Floor Mat |
| TL 52704 | Static Body Seals and Molded Corners Made of EPDM |
| TL 52711 | Underbody Applications – Engine Encapsulations, Transmission Encapsulations, and cd-Enhancing Underbody Panels Made of LWRT |
| TL 52726 | Plastic High-Gloss Applications in the Exterior Area |
| TL 52742 | Wheel Trim Add-on Parts |
| TL 82086 | Refrigerant Heat Exchanger |
| TL 82132 | Charge Air Coolers |
| TL 82316 | R134a/R1234yf Refrigerant Lines |
| TL 82406 | Heater Cores |
| TL 82436 | Hood Hinge - Single-Joint and Multiple-Joint |
| TL 82448 | Brake line - Flare Load Capacity, Reverse Bending Test |
| VW 2.8.1 | Elastomers |
| VW 13750 | Surface Protection for Metal Parts |
| VW 44045 | Polypropylene, Finished Parts |
| VW 50002 | Test Agents - Materials Compatibility |
| VW 50123 | Thermoplastic Elastomers |
| VW 50125 | Polyamide 6 for Finished Parts in the Vehicle Interior |
| VW 50133 | PA66 for Finished Parts Outside the Vehicle Interior |
| VW 50134 | PA6 for Finished Parts Outside the Vehicle Interior |
| VW 50136 | PBT for Finished Parts Outside the Vehicle Interior |
| VW 50164 | Methods for Testing and Releasing VCI Packaging Materials |
| VW 50180 | Emission Behavior |
| VW 50185 | Open-Air Weathering |
| VW 50190 | Visual Evaluation of Chrome Surfaces |
| VW 50194 | Definition of Tolerances and Evaluation of the Differences in the Sparkling and Graininess of Effect Paints |
| VW 50195 | Colorimetric Evaluation of Exterior Automotive Paint Finishes |
| VW 50196 | Decorative Exterior Parts in Non-Body Color |
| VW 80000 | Electric and Electronic Components in Motor Vehicles up to 3.5 t |
| VW 96023-2 | Corrosion protection requirements - Part 2: Requirements according to Modified Environmental Cycle Test |
| VW 96043 | Interior Emission Behavior |
| VW 96076 | General Design Information, Corrosion Classes and Zone Classification |
| VW 96135 | Interior / Exterior - Surface Decors ; Plastic Components with Electrolytically Deposited Metal Surfaces |
| VW 96136 | Exterior; Decorative Foil / Protective Foil / Decorative Foil with Protective Function. |
| VW 96183 | Interior ; Surface Decors - Painting/ Pad Printing/ Hot Stamping |
| VW 96197 | Adhesive films and tapes for vehicle interiors and exteriors |
| VW 96232 | Tufted Carpets for Floor Covering, Seat Covers and Inlay Mats |
| VW 96238 | Interior; General Requirements for Components and Semi-Finished Materials |
| VW 96243 | Burning Behavior |
| VW 96378 | Weathering in Dry, Hot Climate / in Humid, Hot Climate |
| VW 96379 | Environmental Cycle Test |
| VW 96380 | Modified Environmental Cycle Test |
| VW 96383 | Limiting Surface Flaws - Vehicle Interior |
| VW 96408 | Peel Test |
| VW 96453 | Absorbent Material made of Fiber Nonwoven for the Interior |
| VW 96457 | Paintwork on Plastic Exterior Parts and Fiber-Reinforced Plastics |
| VW 96458 | Paintwork on Plastic Exterior Parts and Fiber Composite Plastics |
| LAH.000.825.A | Underbody textile LWRT |
Contact
Volkswagen
